MudmotorTalk.com http://mudmotortalk.com/mmt_v2/ |
|
DDM bullying UncleJ http://mudmotortalk.com/mmt_v2/viewtopic.php?f=18&t=37153 |
Page 2 of 9 |
Author: | AKA Freshwaterkilla [ Sun Feb 03, 2013 7:45 pm ] |
Post subject: | Re: DDM bullying UncleJ |
Author: | deltaduckmaster [ Sun Feb 03, 2013 7:47 pm ] |
Post subject: | Re: DDM bullying UncleJ |
Author: | tchauvin [ Sun Feb 03, 2013 7:48 pm ] |
Post subject: | Re: DDM bullying UncleJ |
Author: | craig [ Sun Feb 03, 2013 7:48 pm ] |
Post subject: | Re: DDM bullying UncleJ |
Author: | deltaduckmaster [ Sun Feb 03, 2013 8:00 pm ] |
Post subject: | Re: DDM bullying UncleJ |
Author: | UNCLE-J [ Sun Feb 03, 2013 8:09 pm ] |
Post subject: | Re: DDM bullying UncleJ |
4500 rev limiter I have to trim down while running not to constantly bounce rev limiter. |
Author: | OwenDickeson [ Sun Feb 03, 2013 8:11 pm ] |
Post subject: | Re: DDM bullying UncleJ |
![]() |
Author: | UNCLE-J [ Sun Feb 03, 2013 8:12 pm ] |
Post subject: | Re: DDM bullying UncleJ |
My heads are 20 thousands. We going to shave to 60, and put higher rev limiter. |
Author: | UNCLE-J [ Sun Feb 03, 2013 8:13 pm ] |
Post subject: | Re: DDM bullying UncleJ |
Author: | deltaduckmaster [ Sun Feb 03, 2013 8:13 pm ] |
Post subject: | Re: DDM bullying UncleJ |
Author: | tchauvin [ Sun Feb 03, 2013 8:14 pm ] |
Post subject: | Re: DDM bullying UncleJ |
Author: | craig [ Sun Feb 03, 2013 8:14 pm ] |
Post subject: | Re: DDM bullying UncleJ |
Author: | deltaduckmaster [ Sun Feb 03, 2013 8:16 pm ] |
Post subject: | Re: DDM bullying UncleJ |
Author: | TURBODRIVE [ Sun Feb 03, 2013 8:16 pm ] |
Post subject: | Re: DDM bullying UncleJ |
Author: | UNCLE-J [ Sun Feb 03, 2013 8:16 pm ] |
Post subject: | Re: DDM bullying UncleJ |
How to run that mud:: That would be lighter boat in that situation. Yeti had 3 cases of beer and 3 20# bags of ice. Then small ice chest had beer and 1 20# bag of ice. I had extra 6 gallons of gas, and a second person weighing 200#'s. take that stuff out, and I promise you that situation would not have occurred. |
Author: | UNCLE-J [ Sun Feb 03, 2013 8:17 pm ] |
Post subject: | Re: DDM bullying UncleJ |
Author: | deltaduckmaster [ Sun Feb 03, 2013 8:18 pm ] |
Post subject: | Re: DDM bullying UncleJ |
You took all that out when we raced. ![]() |
Author: | tchauvin [ Sun Feb 03, 2013 8:19 pm ] |
Post subject: | Re: DDM bullying UncleJ |
Author: | Beadlejuicejr [ Sun Feb 03, 2013 8:19 pm ] |
Post subject: | Re: DDM bullying UncleJ |
Author: | deltaduckmaster [ Sun Feb 03, 2013 8:21 pm ] |
Post subject: | Re: DDM bullying UncleJ |
Author: | tchauvin [ Sun Feb 03, 2013 8:22 pm ] |
Post subject: | Re: DDM bullying UncleJ |
Author: | deltaduckmaster [ Sun Feb 03, 2013 8:24 pm ] |
Post subject: | Re: DDM bullying UncleJ |
Author: | UNCLE-J [ Sun Feb 03, 2013 8:27 pm ] |
Post subject: | Re: DDM bullying UncleJ |
It's not a heavy boat. But a long boat. It runs flat. 19'8" |
Author: | AKA Freshwaterkilla [ Sun Feb 03, 2013 8:28 pm ] |
Post subject: | Re: DDM bullying UncleJ |
Author: | craig [ Sun Feb 03, 2013 8:29 pm ] |
Post subject: | Re: DDM bullying UncleJ |
I think it's one of the fastest PD setup's I've ever been around. |
Author: | tchauvin [ Sun Feb 03, 2013 8:30 pm ] |
Post subject: | Re: DDM bullying UncleJ |
Author: | deltaduckmaster [ Sun Feb 03, 2013 8:31 pm ] |
Post subject: | Re: DDM bullying UncleJ |
Author: | AKA Freshwaterkilla [ Sun Feb 03, 2013 8:31 pm ] |
Post subject: | Re: DDM bullying UncleJ |
Author: | UNCLE-J [ Sun Feb 03, 2013 8:36 pm ] |
Post subject: | Re: DDM bullying UncleJ |
Author: | AKA Freshwaterkilla [ Sun Feb 03, 2013 8:37 pm ] |
Post subject: | Re: DDM bullying UncleJ |
Author: | UNCLE-J [ Sun Feb 03, 2013 8:37 pm ] |
Post subject: | Re: DDM bullying UncleJ |
Did you really say MOST boats run 32-33?? Hitting 32 in shallow water for 5 seconds does not mean that your boat runs that fast. Just sayin. |
Author: | UNCLE-J [ Sun Feb 03, 2013 8:37 pm ] |
Post subject: | Re: DDM bullying UncleJ |
Author: | AKA Freshwaterkilla [ Sun Feb 03, 2013 8:38 pm ] |
Post subject: | Re: DDM bullying UncleJ |
Author: | UNCLE-J [ Sun Feb 03, 2013 8:39 pm ] |
Post subject: | Re: DDM bullying UncleJ |
Terry and Craig... Please talk some sense into y'all follower.. |
Author: | tchauvin [ Sun Feb 03, 2013 8:39 pm ] |
Post subject: | Re: DDM bullying UncleJ |
Author: | take'emgator [ Sun Feb 03, 2013 8:41 pm ] |
Post subject: | Re: DDM bullying UncleJ |
Prodrives just suck in the mud, point and case! In this case it looks like the operator, hey J you better keep that 4500 rev limiter because if you can't go no where banging on 4500 rpms you definitly ain't go go no where banging 5000 rpms, but your motor will go somewhere lol |
Author: | deltaduckmaster [ Sun Feb 03, 2013 8:41 pm ] |
Post subject: | Re: DDM bullying UncleJ |
Lol he's bout to have a fast fast gd lol |
Author: | UNCLE-J [ Sun Feb 03, 2013 8:41 pm ] |
Post subject: | Re: DDM bullying UncleJ |
How in the world can you talk shit , and you don't even have a functional motor? |
Author: | AKA Freshwaterkilla [ Sun Feb 03, 2013 8:44 pm ] |
Post subject: | Re: DDM bullying UncleJ |
Author: | OwenDickeson [ Sun Feb 03, 2013 8:45 pm ] |
Post subject: | Re: DDM bullying UncleJ |
Page 2 of 9 | All times are UTC - 6 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |