MudmotorTalk.com
http://mudmotortalk.com/mmt_v2/

New MMT Member Intros
http://mudmotortalk.com/mmt_v2/viewtopic.php?f=2&t=3
Page 5 of 23

Author:  schrieverboy [ Thu Sep 24, 2009 7:47 am ]
Post subject:  Re: New MMT Member Intros

welcome to the site.. def the place to help you on your dec. making

Author:  MudHog [ Thu Sep 24, 2009 8:00 am ]
Post subject:  Re: New MMT Member Intros

thanks.

I'm leaning towards a 1442 or 1448 and a 23 or 27hp MM.

Author:  ETxDuckHunter [ Fri Sep 25, 2009 12:31 pm ]
Post subject:  Re: New MMT Member Intros

New guy here....
name is Adam, currently living in Phoenix, AZ but will be relocating to Longview, TX in January and can't wait to get out of the desert. Don't have a rig yet but will be building my boat this spring/summer and look forward to learning as much as I can from you mud motor veterans as I can.

Author:  slambin [ Fri Sep 25, 2009 12:39 pm ]
Post subject:  Re: New MMT Member Intros

Welcome to the addiction!! Just dont take anything too seriously.

Author:  drake11 [ Fri Oct 02, 2009 4:03 pm ]
Post subject:  Re: New MMT Member Intros

SGT Magnuson here from NC, currently in Iraq. What's up MMT!

Got me a little starter mud boat, nothing fancy. Figured I'd start off small and beat the crap out of it and then my wife won't have any choice but to let me buy a nice big rig. Anyways, this is what I have:

1436 Aluma"crap" with a 9 HP GDLT pushing her (very slow). Can't wait to load her down with dozens of decoys. Maybe I'll get 6 MPH if I'm lucky. Guess I'll be hunting close to the ramp!

Peace

Author:  BayouStateHunter [ Fri Oct 02, 2009 8:00 pm ]
Post subject:  Re: New MMT Member Intros


Author:  SubDuck [ Tue Oct 06, 2009 4:36 pm ]
Post subject:  Re: New MMT Member Intros

Scott from Kingsland, Ga I drive a Alumacraft Waterfowler 15 with a broke ass old Mariner motor and I am looking for a mud motor to replace it...

Author:  Mud Slinger [ Sun Oct 18, 2009 10:09 pm ]
Post subject:  Re: New MMT Member Intros

welcome Scott and all you other newbies :D

Author:  take'emgator [ Tue Oct 20, 2009 7:59 pm ]
Post subject:  Re: New MMT Member Intros

J.Peltier aka (TURBO) Groves, Tx. 2010 18/46 Borel costum boat with 2010 camo 35GTR with extreme v/twins exhaust

Author:  garjacker [ Thu Oct 29, 2009 7:40 pm ]
Post subject:  Re: New MMT Member Intros

Marty H. here from greensboro N.C. ive been bowfishin for about 15 yrs and never seen these beasts til about 3 yrs ago finally got a 16hp gdlt and im goin places i could only drag before. look forward to learning from all the spurts on this forum.

Author:  quackconsumer [ Fri Oct 30, 2009 1:20 pm ]
Post subject:  Re: New MMT Member Intros

Welcome to da site fellas.

Author:  th3 [ Sat Oct 31, 2009 7:26 pm ]
Post subject:  Re: New MMT Member Intros

im th3 from magtown, south ark. and yep, another new guy that dont know squat bout mud motors or mud boats, dats me.

gots a 08' 21ft ski wit a 5.0 merc thats mine and hunt with an older 1542 mod v war eagle/ 25 outboard that aint mine. you know how it is when you got a borrowd rig, cant put it through nothing for fear of hurtin it.

im ready for my own duck boat but wife making me dump the ski boat before i get it, and dats fine wit me cause i gots way too much money in a ski boat to only put in the water 4 times a year anyway. soon as i get that ski boat sold, its on!

ive checked several other sites and this is my favorite.......
ill be asking alot of dumb question so yall bear with me, i gots lots to learn.
so far yall have been great, lots of pms and quick replies to my post, thanks!!!

Author:  DeathMetalDukk [ Sat Oct 31, 2009 7:34 pm ]
Post subject:  Re: New MMT Member Intros

Welcome to the site Noobs!

Author:  2bbshot [ Fri Nov 06, 2009 7:34 pm ]
Post subject:  Re: New MMT Member Intros

Hey, Im new to the forum. I just bought a 17ft Dixon Seminole Bateau and a 25hp Kohler Mudbuddy longtail. I have had several outboard motor duck boats and this is my first mudmotor. I live in Macon,Ga and hunt up in Stevenson, Al. I look forward to chattin with you boys.

Author:  BROOKSD [ Sun Nov 08, 2009 6:12 pm ]
Post subject:  Re: New MMT Member Intros

Located in NE LA, Just joined a couple of weeks ago, but have been lurking for a while. Currently 14' Duracraft w/ 9 hp GoDevil. Last week ordered a 1854 Prodrive Center Console w/ 35 FPR, can hardly wait.

Author:  misfire [ Wed Nov 11, 2009 10:03 am ]
Post subject:  Re: New MMT Member Intros

Shoulda closed and locked the doors. Another GA boy here. Runnin a Gatortrax 18x44 with a MB 31 Hyper.

Author:  cmelvin [ Fri Nov 13, 2009 9:29 pm ]
Post subject:  Re: New MMT Member Intros

Curtis Melvin in Beaumont, Tx driving a
1846 GT Boat w/ 35 GT Stock

Author:  Aeon [ Tue Nov 17, 2009 9:36 pm ]
Post subject:  Re: New MMT Member Intros

Hi my name is Bill and i am now the proud owner of a new Prodrive :) I think i might be the only one on this site from Southern California....

Author:  chops3131 [ Mon Nov 30, 2009 11:14 am ]
Post subject:  Re: New MMT Member Intros

Keith Daley from Beaumont Texas

Author:  ff154 [ Mon Nov 30, 2009 12:58 pm ]
Post subject:  Re: New MMT Member Intros

Scott from Marshall, TX. I had an old membership here, but I guess the web site changed. Was running a Legend boat with a 20hp longtail, now running a 1748 PD with 36 PD. Firefighter/ Paramedic with the city of Marshall. Father of three girls. I don't know what ya'll want to know, so here are some pictures of my boat:





I was too lazy to pull it out from under the shed for pictures. It's a 1748 high transom. It gets me where I need to go.

Author:  Team Camo [ Thu Dec 03, 2009 9:08 pm ]
Post subject:  Re: New MMT Member Intros

Sorry, about a month or so late.
Rob "Camo" Vail grew up in Bridge City, TX now livin in Port Acres, TX.
35, married for 14 yrs, 2 kids, 3 dogs, & a partidge in a pear tree.
Right now I'm runnin a 15x48 sv G3 with a 27hp MB Mini Lite.
Hopin to have a new hull soon.

Author:  Quackiller08 [ Thu Dec 10, 2009 7:08 pm ]
Post subject:  Re: New MMT Member Intros

Hey yall im Blake from SETX

runnin a 35 mb la mud special on a 1751 mod-v

Author:  kwak smacker19 [ Fri Dec 11, 2009 7:33 pm ]
Post subject:  Re: New MMT Member Intros

C.J. Galatas
16x48 weldbilt with 35 gator tail gt
(reverse and exhaust coming soon)
From St. Rose La

Author:  Head [ Sat Dec 12, 2009 6:24 pm ]
Post subject:  Re: New MMT Member Intros

HI,

Loren from Joliet IL, I dont have a MM yet but hope to put one togehter soon. I did have Muddoctor redo a 1980 Lowe into a custom bowfishig rig. That is where i saw the prodrive MM and his boats and have been asking the boss about upgrading to one ever since. Just want to thank you all for the good info and ideals.

thanks

Head


Author:  Hyper Josh [ Sun Dec 13, 2009 6:52 pm ]
Post subject:  Re: New MMT Member Intros

Josh Watkins
Texarkana, Ar sulfur river bottoms
1750 Gator Trax Hyper Tunnel
35 HD sport

1648 Xpress
35 GDSD for sale

Author:  rangerman28 [ Tue Dec 15, 2009 9:36 pm ]
Post subject:  Re: New MMT Member Intros

Hello my name is Derek Picard. i am from Lafayette la . I am 28 got 5 kids love to hunt and fish. i work offshore 14 and 14 i have a 18x48 brother breaux boat with 36 fpr pd and i also have a ranger r83vs with a 175 merc.

Author:  BrackIV [ Tue Dec 15, 2009 10:45 pm ]
Post subject:  Re: New MMT Member Intros

Another newbie. Mark Mathias Brackin IV. Beaumont, Tx. Started out w/ a 16hp GDLT at age 14 and put it on any boat sittin in my yard that floated. Got ahold of an 18hp engine and swapped them out. Got a 23 MB mini as a graduation present and been rockin it ever since. Currently have it strapped to a 1542 "allweld hide". Upgrading the boat this summer to a Borel and adding mods to the engine. Eventually going all out w/ the Gator Hide/45 MB magnum combo.

Author:  chocolate head [ Wed Dec 16, 2009 3:35 am ]
Post subject:  Re: New MMT Member Intros

David Lambert
Baton Rouge, LA
Gator Trax 1750 hunt deck
Mud Buddy 35 HD

Author:  cb5331 [ Fri Dec 18, 2009 8:16 pm ]
Post subject:  Re: New MMT Member Intros

..........

Author:  quackconsumer [ Fri Dec 18, 2009 8:28 pm ]
Post subject:  Re: New MMT Member Intros

Welcome to all of our new members, especialy da new SETX fellas. Just cause we may give ya a hard time don't mean we don't like ya. Except for River, but he hates everyone equally. :D I hope yall are able to gather da iformation dat you may need and enjoy da site. Also, I would like to wish you and your families a safe and merry christmas.

Author:  DevilDogCruiser [ Sun Dec 20, 2009 2:01 pm ]
Post subject:  Re: New MMT Member Intros

John Kopek

Fayetteville, AR.

Im 23, Current student at the University of Arkansas. I am an Iraqi war vet. My dad and I own a retriever kennel. I love to hunt waterfowl. I dont have a mud rig yet, I want a 1644 Gator Trax with a huntdeck pulling a 27 hp Pro Drive with FPR. So hopefully spending all this money on college will pay off, so I can get my dream rig. I currently have just a 1436 flat jon with a 1967 18hp Evinrude. It gets me where i need to go to kill some birds. This site ROCKS by the way.

Author:  craig [ Sun Dec 20, 2009 2:04 pm ]
Post subject:  Re: New MMT Member Intros


Author:  BROOKS [ Tue Dec 22, 2009 12:06 pm ]
Post subject:  Re: New MMT Member Intros


Author:  jraducks [ Thu Dec 24, 2009 6:34 pm ]
Post subject:  Re: New MMT Member Intros

Whats up? I am 23 years old from Mississippi. I have a 2008 18x8 American Air Ranger Airboat with a 496 Levitator right now, workin on getting a MM rig in the very near future too. Cool site here..

Here are a few pictures of the boat.







A little advertising for American Airboats


Gotta have one with the sticker in it!


Fun night!


I like to bowfish a little bit..

Author:  JLeMieux [ Sun Dec 27, 2009 1:46 pm ]
Post subject:  Re: New MMT Member Intros

Hey guys I'm new to the sight as well as a new MM owner. I have an 1836 with a 16hp go-devil that I haven't even seen in person yet. I'm deployed right now and found a good deal online and had my buddy pick it up for me.

Author:  jraducks [ Sun Dec 27, 2009 7:20 pm ]
Post subject:  Re: New MMT Member Intros


Author:  binglis74 [ Mon Dec 28, 2009 9:46 am ]
Post subject:  Re: New MMT Member Intros

Brian Inglis from Stevenson, Al. I have a 17/52 Weldbilt boat with a 35 GT on back. The only thing changed on motor, I put a Marshmellow Double Barrel exhaust on it.

Author:  EasTexDux88 [ Mon Dec 28, 2009 9:50 am ]
Post subject:  Re: New MMT Member Intros

Welcome to tha site guys!

Author:  HUNT4DEER [ Sun Jan 03, 2010 11:25 am ]
Post subject:  Re: New MMT Member Intros

cory here, trans plant to PULASKI TN FROM ORLANDO FL. on third boat now. OG was a 14x36 grizzley with 13 beaver lt. great single man boat. second was a 14x36 rivet with 5.5 scavenger got tierd of just floating the creek and could then go both ways slowllllly. now on a 14x48 riveted triton (lite weight) w/ 23 mini lite. runs with the jets just much faster. havent found a place they can go that i cant.

Author:  gstics [ Wed Jan 06, 2010 8:44 pm ]
Post subject:  Re: New MMT Member Intros

Gary Rostic from Springfield, MO ...by way of Pittsburgh, PA

16 x 54 Tracker Grizzly
32 hp PD, Stage I

Page 5 of 23 All times are UTC - 6 hours
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/