| Author |
Message |
|
bpurvis
MMT Addict
Joined: Fri Jul 30, 2010 9:30 am
Posts: 627
Location: Baton Rouge, LA
|
 Go devil recall!!!!! "our records indicate you are the owner of a go-devil model 16x56 boat. In a recent coast guard testing of a different model (which means the same shit), it was determined that there was insufficient flotation material in the stern of the boat so that the bow would remain afloat, but the stern would sink, If the boat takes on water. We devised a repair kit to remedy this problem and are in the process of offering to have these kits installed at no cost to the owners of the affected boat model. I'm writing to alert you to the possibility that there MIGHT be INSUFFICIENT flotation in the stern and to offer you a similar repair kit, installed at mo cost to you" Hahahahahah well........ Warren Coco is sincere and available to discuss this matter with you and please do not hesitate to to call him at 225-752-0167 ORRRRR toll free!!! At 888-490-3254  he is committed to providing his customers with the best quality products at a "competitive price"
_________________
Sold my Uncle-J and my PD so Fuc* Y'all!!!!!.
"THE EDGE: There is no honest way to explain it because, the only ones who know where it is have gone over. The others... the living, are those who've pushed their control as far as they felt they could handle and then pulled back or slowed down........BUT the edge is still out there...."
|
| Wed Sep 21, 2011 11:30 pm |
|
|
|
med
MMT Elite Member
Joined: Wed Jan 14, 2009 8:25 am
Posts: 6432
Location: the dark side of the moon
|
Re: Go devil recall!!!!! They admit a mistake and will make it right. I don't see the issue. Warren talked to me on the phone about it and was nice as can be. Problem solved.
_________________
1850 & 36pd
|
| Wed Sep 21, 2011 11:33 pm |
|
|
|
Gigafowl
MMT Elite Member
Joined: Tue Jan 13, 2009 7:19 pm
Posts: 6441
Location: Trinity Bay - Texas
|
Re: Go devil recall!!!!! X2
They contacted me about a year ago - got the kit and
they went the extra mile and installed under floor foam too
at my request at no charge. I was in and out in a few
hours.
They are moving thru all the models even those
which weren't specificaly named by USCG.
_________________
Eat - Sleep - Hunt ! ! !
"It is good to have an end to journey toward; but
it is the journey that matters, in the end."
|
| Thu Sep 22, 2011 4:07 am |
|
|
|
The Shafer
MMT 1000 Club
Joined: Tue Jan 13, 2009 7:46 pm
Posts: 1947
Location: Longview. TX
|
Re: Go devil recall!!!!! dumbass... that shit is old. quit trying to stir shit up you phucking idiot.
_________________
WC 1848 Bateau w/ 36 PD FPR
|
| Thu Sep 22, 2011 8:13 am |
|
|
|
bpurvis
MMT Addict
Joined: Fri Jul 30, 2010 9:30 am
Posts: 627
Location: Baton Rouge, LA
|
Go devil recall!!!!! Might be old but it just came in my mail box 5 days ago.... Sorry for getting your GD panties in a wod.
_________________
Sold my Uncle-J and my PD so Fuc* Y'all!!!!!.
"THE EDGE: There is no honest way to explain it because, the only ones who know where it is have gone over. The others... the living, are those who've pushed their control as far as they felt they could handle and then pulled back or slowed down........BUT the edge is still out there...."
|
| Fri Sep 23, 2011 7:29 am |
|
|
|
kibb
MMT 1000 Club
Joined: Wed Jan 14, 2009 8:58 pm
Posts: 2731
Location: Lafayette, LA
|
Go devil recall!!!!! EPIC!!
_________________
1644 WeldCraft / 27 GDLT
Ranger R71 / 125 Merc
|
| Fri Sep 23, 2011 8:54 am |
|
|
|
tchredneck
MMT 1000 Club
Joined: Tue Jan 13, 2009 7:39 pm
Posts: 1812
Location: in the woods,la
|
Re: Go devil recall!!!!! to hell with that foam yall are fools for trusting in it.
_________________
27 Contender twin 200's
for sale
18x42 B.B skiff Lil daddy 36 pd
Fighting da Koolaid brigade since 07'
|
| Fri Sep 23, 2011 10:14 am |
|
|
|
kibb
MMT 1000 Club
Joined: Wed Jan 14, 2009 8:58 pm
Posts: 2731
Location: Lafayette, LA
|
Go devil recall!!!!! Just got back from a buddies house and he has an older Southfork w/35 GTR. He's got a few cracks in the crimp on the bottom of the hull. How's the flotation in these hulls? Are they prone to waterlogging too? I'm sure they are. He never believes what anybody has to say so I just wanted a second opinion. Thanks.
_________________
1644 WeldCraft / 27 GDLT
Ranger R71 / 125 Merc
|
| Fri Sep 23, 2011 10:18 am |
|
|
|
DeuceChunker
MMT Addict
Joined: Fri Dec 04, 2009 9:56 am
Posts: 730
|
Re: Go devil recall!!!!!
|
| Fri Sep 23, 2011 10:38 am |
|
|
|
bpurvis
MMT Addict
Joined: Fri Jul 30, 2010 9:30 am
Posts: 627
Location: Baton Rouge, LA
|
Go devil recall!!!!! My thing about it is why even have it if it isn't enough to actually keep the motor out of the water? I can see having it for the guys who run deep water but I rarely run anything deeper that 4-5 feet...... Just seems like more trouble than it's worth once it's been submerged.
_________________
Sold my Uncle-J and my PD so Fuc* Y'all!!!!!.
"THE EDGE: There is no honest way to explain it because, the only ones who know where it is have gone over. The others... the living, are those who've pushed their control as far as they felt they could handle and then pulled back or slowed down........BUT the edge is still out there...."
|
| Fri Sep 23, 2011 10:46 am |
|
|
|
Gigafowl
MMT Elite Member
Joined: Tue Jan 13, 2009 7:19 pm
Posts: 6441
Location: Trinity Bay - Texas
|
Re: Go devil recall!!!!! Do you still have the GD 16x56 ???
_________________
Eat - Sleep - Hunt ! ! !
"It is good to have an end to journey toward; but
it is the journey that matters, in the end."
|
| Fri Sep 23, 2011 10:56 am |
|
|
|
kibb
MMT 1000 Club
Joined: Wed Jan 14, 2009 8:58 pm
Posts: 2731
Location: Lafayette, LA
|
Go devil recall!!!!!
_________________
1644 WeldCraft / 27 GDLT
Ranger R71 / 125 Merc
|
| Fri Sep 23, 2011 1:53 pm |
|
|
|
DeuceChunker
MMT Addict
Joined: Fri Dec 04, 2009 9:56 am
Posts: 730
|
Re: Go devil recall!!!!!
|
| Fri Sep 23, 2011 2:11 pm |
|
|
|
retired and broke
MMT Pro Member
Joined: Sat May 01, 2010 2:44 pm
Posts: 411
|
Re: Go devil recall!!!!! Did someone say Obama phucker?
You do not have the required permissions to view the files attached to this post.
|
| Fri Sep 23, 2011 2:41 pm |
|
|
|
