| MudmotorTalk.com http://mudmotortalk.com/mmt_v2/ |
|
| Motor Bogging Down?? http://mudmotortalk.com/mmt_v2/viewtopic.php?f=2&t=23665 |
Page 1 of 1 |
| Author: | Duck Slayer 27 [ Wed Nov 02, 2011 9:21 pm ] |
| Post subject: | Motor Bogging Down?? |
Do all mudmotors (STOCK) bog down when they get in thick hard mud? I dont really know if mines always done this because i rarley run in hard thick mud but is this normal or what? |
|
| Author: | T-Bubba [ Wed Nov 02, 2011 9:22 pm ] |
| Post subject: | Re: Motor Bogging Down?? |
most of the stock motors do it in thick stuff.... if its doing it bad check your valves |
|
| Author: | duckduckboom [ Wed Nov 02, 2011 9:24 pm ] |
| Post subject: | Re: Motor Bogging Down?? |
yes because you are putting more load on your prop |
|
| Author: | Duck Slayer 27 [ Wed Nov 02, 2011 9:30 pm ] |
| Post subject: | Re: Motor Bogging Down?? |
well i like to think its not normal because in the thick stuff i can only get about 800 rpm's out of it... not even enough to consider moving the boat even in 8 inches of water |
|
| Author: | duckduckboom [ Wed Nov 02, 2011 9:45 pm ] |
| Post subject: | Re: Motor Bogging Down?? |
Like you can only get 800 or it idles at 800? |
|
| Author: | Duckdon [ Thu Nov 03, 2011 6:24 am ] |
| Post subject: | Re: Motor Bogging Down?? |
Put enough resistant load on the prop and you will kill the motor or break something. Just sayin..Duckdon |
|
| Author: | Duck Slayer 27 [ Thu Nov 03, 2011 10:16 pm ] |
| Post subject: | Re: Motor Bogging Down?? |
can only get 800.. and yea i know it will break something but i just think it should be able to turn the prop in mud period? im pretty new with the mudmotor and really havent had that much experience in alot of mud but i just thought mabey it would turn it better being a 35 but i guess if its thick enough it will stop that big three blade. |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|