| MudmotorTalk.com http://mudmotortalk.com/mmt_v2/ |
|
| need help http://mudmotortalk.com/mmt_v2/viewtopic.php?f=2&t=30796 |
Page 1 of 1 |
| Author: | papaw [ Sun Jul 15, 2012 4:52 pm ] |
| Post subject: | need help |
 i need some advice i built this rig and put it in for the frist time and it wont get on pad .yes it is a 33 hp generac .i have a 38 on top and 50 on the bottom.a 27" outdrive im a big dude but damn i would think it would get it on pad. the boat is a 17' xpress 50" bottom 72" beam it is a bass boat that i hulled out .where do i go from here? boat doc said go to a 52 on bottom and im sure that will help but i dont think that will be enough thanks 
|
|
| Author: | Woodiebuster [ Sun Jul 15, 2012 5:36 pm ] |
| Post subject: | Re: need help |
Are the transom heights matched? Are your rpm's where they should be? What is the prop doing? You really described it vaugley so I cant give an answer, but your best bet is to put a 90 Yamaha on that boat and get a real Mud-Hull for your Mudmotor. |
|
| Author: | papaw [ Sun Jul 15, 2012 5:45 pm ] |
| Post subject: | Re: need help |
yes they match,they r 3500 rpm it is digging. and i dont wont a narrow boat .and i like just having one boat .thanks for your help. |
|
| Author: | Woodiebuster [ Sun Jul 15, 2012 6:23 pm ] |
| Post subject: | Re: need help |
Have you messed with trim settings any? Start trimmed all the way down and slowly trim up until it finds its sweet spot. What is your thinking behind a mud-boat being narrow? They make mudboat hulls that size or bigger everyday. But that ribbed mod-v hull will never run right. |
|
| Author: | papaw [ Sun Jul 15, 2012 6:33 pm ] |
| Post subject: | Re: need help |
i didn t know thay made a wide one who makes it . and this is a hyper hull dont know if it is classified as a ridded. i my need to sale the motor and get a gtr. |
|
| Author: | odass [ Sun Jul 15, 2012 6:51 pm ] |
| Post subject: | Re: need help |
I'm not sure on a generac but 3500 isn't very much. Should be over 4k. Also you seriously need to measure your transom height. Its a bigger deal then you think. Also I run a mud hull along with countless others that are wide mine is 54" with a 72" beam. It will definatly work better on mud hull good luck |
|
| Author: | papaw [ Sun Jul 15, 2012 7:00 pm ] |
| Post subject: | Re: need help |
ok thanks. the transom is 21" and the motor is a tall one top cover has 8 bolts in it .is your boat still for sale |
|
| Author: | odass [ Sun Jul 15, 2012 8:27 pm ] |
| Post subject: | Re: need help |
Possibly man. I've got bow fishing set up on it now but I might make a deal. Also your transom will work the best at about 19.5 sounds dumb but I've been down that road. A 32" drive will defiantly help with that |
|
| Author: | papaw [ Sun Jul 15, 2012 9:02 pm ] |
| Post subject: | Re: need help |
ok thanks i think i wil get a mud hull |
|
| Author: | odass [ Sun Jul 15, 2012 9:13 pm ] |
| Post subject: | Re: need help |
Ok let me know if you're interested |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|