| MudmotorTalk.com http://mudmotortalk.com/mmt_v2/ |
|
| Carolina skiff j16 surface drive or long tail??? http://mudmotortalk.com/mmt_v2/viewtopic.php?f=2&t=45512 |
Page 1 of 1 |
| Author: | Flex [ Mon Sep 16, 2013 8:59 pm ] |
| Post subject: | Carolina skiff j16 surface drive or long tail??? |
And which brand is best n saltwater mud.?? Thanks Flex |
|
| Author: | eljefe [ Mon Sep 16, 2013 10:32 pm ] |
| Post subject: | Re: Carolina skiff j16 surface drive or long tail??? |
Wtf are you asking????? sent from the former Republic of Texas. |
|
| Author: | forever draggin [ Mon Sep 16, 2013 10:34 pm ] |
| Post subject: | Re: Carolina skiff j16 surface drive or long tail??? |
There was a member here that had a gtr on a j16 I believe. Check out the search function I remember there was a review |
|
| Author: | JLACOUR [ Mon Sep 16, 2013 10:35 pm ] |
| Post subject: | Re: Carolina skiff j16 surface drive or long tail??? |
Txpipeliner I think... |
|
| Author: | eljefe [ Tue Sep 17, 2013 5:57 am ] |
| Post subject: | Re: Carolina skiff j16 surface drive or long tail??? |
Ok you are wanting to put a sd or lt on a fiberglass 16' carolina skiff..... either one.....I guess, what conditions are you running? The places you can get into in a sd or lt could destroy the hull. Have you ever run either a sd or lt? sent from the former Republic of Texas. |
|
| Author: | eljefe [ Tue Sep 17, 2013 5:58 am ] |
| Post subject: | Re: Carolina skiff j16 surface drive or long tail??? |
Ok you are wanting to put a sd or lt on a fiberglass 16' carolina skiff..... either one.....I guess, what conditions are you running? The places you can get into in a sd or lt could destroy the hull. Have you ever run either a sd or lt? sent from the former Republic of Texas. |
|
| Author: | Over the LINE [ Tue Sep 17, 2013 9:00 am ] |
| Post subject: | Re: Carolina skiff j16 surface drive or long tail??? |
I had one with a GTR 35 on it. Had all kinds of problems with Carolina Skiff. Old threads are not around anymore as far as I know. If you have not bought the J-16 yet PM me and I will give you the facts. |
|
| Author: | mgrandu1 [ Sat Oct 26, 2013 8:43 am ] |
| Post subject: | Re: Carolina skiff j16 surface drive or long tail??? |
maybe too late. I'm just seeing this now. I run a J16 w/ 35mb...bought it new in 06'. We beefed up the transom before we set the motor on it and it's still running strong today. We run ours in freshwater lakes and marsh only. We have the deck on the bow, seat in the middle and rear. Loaded down w/ 3 heavy guys and gear, we're getting 23-25 knots pending on the depth. The modification, performance carb and exhaust , to the engine made a big difference with performance. We went from 3800 rpms to 4300 and that's a big difference when pushing weight. The whole shot and top end are much better. It's a comfortable boat and it suit our needs fine. Good luck and let me know if you have any additional questions. |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|