You need like 50 of those jesse..
sent from the former Republic of Texas.
| MudmotorTalk.com http://mudmotortalk.com/mmt_v2/ |
|
| Your solution to securing bilge pump to boat bottom? http://mudmotortalk.com/mmt_v2/viewtopic.php?f=2&t=45929 |
Page 1 of 1 |
| Author: | dguidry [ Sun Sep 29, 2013 11:32 am ] |
| Post subject: | Your solution to securing bilge pump to boat bottom? |
Glue bracket to bottom? Other solution? |
|
| Author: | MNGunner [ Sun Sep 29, 2013 11:34 am ] |
| Post subject: | Re: Your solution to securing bilge pump to boat bottom? |
| Author: | msm8281 [ Sun Sep 29, 2013 11:38 am ] |
| Post subject: | Re: Your solution to securing bilge pump to boat bottom? |
Mount it to a 6"x6" piece of aluminum plate. |
|
| Author: | CAJUN OUTLAW [ Sun Sep 29, 2013 12:05 pm ] |
| Post subject: | Re: Your solution to securing bilge pump to boat bottom? |
Some people should just stay on land. |
|
| Author: | Woodiebuster [ Sun Sep 29, 2013 12:26 pm ] |
| Post subject: | Re: Your solution to securing bilge pump to boat bottom? |
duct tape it |
|
| Author: | Will [ Sun Sep 29, 2013 12:33 pm ] |
| Post subject: | Re: Your solution to securing bilge pump to boat bottom? |
http://www.3m.com/product/information/M ... alant.html |
|
| Author: | JIMMY W [ Sun Sep 29, 2013 1:30 pm ] |
| Post subject: | Re: Your solution to securing bilge pump to boat bottom? |
5200 |
|
| Author: | rudyeng [ Sun Sep 29, 2013 2:45 pm ] |
| Post subject: | Re: Your solution to securing bilge pump to boat bottom? |
I did it 3 ways until I got it perfect. This is the best 1. 80 grit sandpaper aluminum & bottom of bilge pump 2. Black 5200 Works great. |
|
| Author: | TX Aggie '06 [ Sun Sep 29, 2013 3:31 pm ] |
| Post subject: | Re: Your solution to securing bilge pump to boat bottom? |
Mine is held down by gravity and in place the rigid tubing that goes out the side of the hull. Sent from my iPhone using Tapatalk - |
|
| Author: | JLACOUR [ Sun Sep 29, 2013 4:30 pm ] |
| Post subject: | Re: Your solution to securing bilge pump to boat bottom? |
Where do you buy that gravity stuff? |
|
| Author: | squirrel [ Sun Sep 29, 2013 4:41 pm ] |
| Post subject: | Re: Your solution to securing bilge pump to boat bottom? |
Wood screws. |
|
| Author: | naj [ Sun Sep 29, 2013 4:44 pm ] |
| Post subject: | Re: Your solution to securing bilge pump to boat bottom? |
| Author: | dfou [ Sun Sep 29, 2013 4:47 pm ] |
| Post subject: | Re: Your solution to securing bilge pump to boat bottom? |
| Author: | Over the LINE [ Sun Sep 29, 2013 4:58 pm ] |
| Post subject: | Re: Your solution to securing bilge pump to boat bottom? |
Mine is plumbed overboard via a PVC pipe that I heat bent to conform to where it runs then 90 degree over the transom. I wire tie the PVC along side my motor mount. Has worked well for years. |
|
| Author: | dguidry [ Sun Sep 29, 2013 5:00 pm ] |
| Post subject: | Re: Your solution to securing bilge pump to boat bottom? |
| Author: | Woodiebuster [ Sun Sep 29, 2013 6:42 pm ] |
| Post subject: | Re: Your solution to securing bilge pump to boat bottom? |
5200 is gunna make a mess when you have to take that cheap bilge pump out to put a new one in. I always just kept one under the deck in a bag, hook up some alligator clamps to the battery and stick the hose over. I cant stand anything fixed stationary in a boat. |
|
| Author: | Full Throttle [ Sun Sep 29, 2013 6:47 pm ] |
| Post subject: | Re: Your solution to securing bilge pump to boat bottom? |
| Author: | msm8281 [ Sun Sep 29, 2013 6:57 pm ] |
| Post subject: | Re: Your solution to securing bilge pump to boat bottom? |
| Author: | North LA Hunter [ Sun Sep 29, 2013 7:20 pm ] |
| Post subject: | Re: Your solution to securing bilge pump to boat bottom? |
I broke a piece of 1/8 however big the pump is square and added 3/4 lip broke up with the side. Put the bottom of the square piece on the bottom of the boat and run the 3/4 up the side. Before I welded it down I took the screen off of the pump and riveted it to the piece of metal. Tack it in good and if the screen ever breaks just take a chisel and break the tacks off. I've did this to 3 boats and I'm pretty rough on my stuff and nothing has ever broke on them. |
|
| Author: | dguidry [ Sun Sep 29, 2013 7:49 pm ] |
| Post subject: | Re: Your solution to securing bilge pump to boat bottom? |
| Author: | eljefe [ Sun Sep 29, 2013 10:10 pm ] |
| Post subject: | Re: Your solution to securing bilge pump to boat bottom? |
Mines just sits there...why do you need it secured? The tubing should keep it from moving much...... mines worked perfect since ive had the new boat.... sent from the former Republic of Texas. |
|
| Author: | JLACOUR [ Wed Oct 02, 2013 8:34 pm ] |
| Post subject: | Re: Your solution to securing bilge pump to boat bottom? |
Cause that the way it came! |
|
| Author: | eljefe [ Wed Oct 02, 2013 8:48 pm ] |
| Post subject: | Re: Your solution to securing bilge pump to boat bottom? |
You need like 50 of those jesse.. sent from the former Republic of Texas. |
|
| Author: | JLACOUR [ Wed Oct 02, 2013 8:51 pm ] |
| Post subject: | Re: Your solution to securing bilge pump to boat bottom? |
| I hope not in this boat!
|
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|