I love the way you built up your transom lol. Is that pressure treated?
| MudmotorTalk.com http://mudmotortalk.com/mmt_v2/ |
|
| New MAC Exhaust http://mudmotortalk.com/mmt_v2/viewtopic.php?f=2&t=52964 |
Page 1 of 1 |
| Author: | benelli08 [ Sun May 04, 2014 6:39 pm ] |
| Post subject: | New MAC Exhaust |
Think I'm Mac preformance exhaust first coustmer and it starred off with perty good coustmer service I sold my mm exhaust. They told me they would have one for me by Friday . We'll some stuff came up and they couldn't make it by Friday afternoon we'll I told them I needed it to go to the camp Saturday and they worked late until it was done so I could use my boat Saturday picked it up at 7 Saturday morning bolted it on and I was off to the camp i like it it has a deeper tone to it and it got some rumble to it as we'll and best part is that it don't back fire at all unlike the Marsh mellow ima try and get a video of me passing by one day this week but I got some pics |
|
| Author: | JLACOUR [ Sun May 04, 2014 6:44 pm ] |
| Post subject: | Re: New MAC Exhaust |
You forgot to mention how many mph you gained!! |
|
| Author: | benelli08 [ Sun May 04, 2014 6:54 pm ] |
| Post subject: | Re: New MAC Exhaust |
Be honest I can't compare yet I've only ran with a load I had 2 ppl 2 ice chest. Dog trollig motor 2 batteries rod box and a full 14 gal Of gas and I was bumping 31 only bad thing ima have to learn the sound of it cause I had my marsh mellow for 3 years and I knew what it suposed to sound like we'll good thing I checked my tach cause it was turning 4650 |
|
| Author: | doubleBanded [ Sun May 04, 2014 7:02 pm ] |
| Post subject: | Re: New MAC Exhaust |
Looks nice |
|
| Author: | Buzz Killington [ Sun May 04, 2014 7:11 pm ] |
| Post subject: | Re: New MAC Exhaust |
I like it |
|
| Author: | NORTHFLORIDAFOWLER [ Sun May 04, 2014 7:56 pm ] |
| Post subject: | Re: New MAC Exhaust |
basically a single barrel marshmellow with different inlets, nice work |
|
| Author: | The Hairy Coot [ Sun May 04, 2014 8:12 pm ] |
| Post subject: | Re: New MAC Exhaust |
| Author: | Team Schmo [ Sun May 04, 2014 8:13 pm ] |
| Post subject: | Re: New MAC Exhaust |
Looks great... Curious to see how they hold up and compare to other brands.. |
|
| Author: | THE TANK [ Sun May 04, 2014 8:34 pm ] |
| Post subject: | Re: New MAC Exhaust |
Benelli08 is the first guy to have a MAC with out baffles from what I'm hearing. It's different from a MM from the flange of the exhaust it comes up at a certain degree with slip fits, but dammit that thing looks good! Sent from da woods! |
|
| Author: | AKA Freshwaterkilla [ Sun May 04, 2014 10:40 pm ] |
| Post subject: | Re: New MAC Exhaust |
First of all if u were having ur marsh mellow back firing u had exhaust leaks or ur motor was running to lean and the first thing I done with my marsh mellows was put those stainless t bolt clamps on them maybe that's why mine hasn't had any problems I think after that one has enough hours on it the joint at the header pipes will begin to suk air just like the rest Sent from my iPhone using |
|
| Author: | CootSlayerRMFT [ Sun May 04, 2014 11:01 pm ] |
| Post subject: | Re: New MAC Exhaust |
| Author: | AKA Freshwaterkilla [ Sun May 04, 2014 11:31 pm ] |
| Post subject: | Re: New MAC Exhaust |
| Author: | benelli08 [ Mon May 05, 2014 3:11 am ] |
| Post subject: | Re: New MAC Exhaust |
I tried to post a video off my phone but it would not load Aka from day one my mm woukd back fire and it was out on by gator tail about a month after I bought the motor |
|
| Author: | benelli08 [ Mon May 05, 2014 3:15 am ] |
| Post subject: | Re: New MAC Exhaust |
And if you look at my clutch cover close you can see it's melted that's from my mm cracking whre the inlet went into the bottom canister and had to run it home with it cracked |
|
| Author: | mizzippi jb [ Mon May 05, 2014 3:51 am ] |
| Post subject: | Re: New MAC Exhaust |
I love the way you built up your transom lol. Is that pressure treated?
|
|
| Author: | benelli08 [ Mon May 05, 2014 4:24 am ] |
| Post subject: | Re: New MAC Exhaust |
Ima Bout to take it off I was testing it I thought my transom was to low but it don't seem to be making a difference I need to get a new prop then ima try it like that and then ima drop it back down and compare I been messing with so much stuff lately it was at 20 I was told should have been closer to the 21 mark I fixed one of my major problems a vacum cap was busted and so I gota start all over again with ruling things out. And I been trying different props just trying to figure out where it runs best at |
|
| Author: | GatorDubea [ Mon May 05, 2014 5:36 am ] |
| Post subject: | Re: New MAC Exhaust |
for the 550 price tag it could have some better welds on it those look like crap to me |
|
| Author: | LAduckbuster [ Mon May 05, 2014 7:11 am ] |
| Post subject: | Re: New MAC Exhaust |
i think it looks nice and next time i have half a grand in my secret stash my ole lady doesn't know about ill buy me one |
|
| Author: | skinnerton_outlaw [ Tue May 06, 2014 7:53 pm ] |
| Post subject: | Re: New MAC Exhaust |
Ever get a video of it ? Probably about to put one on mine, that or another gutted stocker. |
|
| Author: | cupped up [ Wed May 07, 2014 4:17 am ] |
| Post subject: | Re: New MAC Exhaust |
| Author: | pooldoo73 [ Wed May 07, 2014 4:58 am ] |
| Post subject: | Re: New MAC Exhaust |
How much better is the performance than a gutted stocker? |
|
| Author: | Mudmotor Slayer [ Wed May 07, 2014 5:13 am ] |
| Post subject: | Re: New MAC Exhaust |
| Author: | Gameover [ Wed May 07, 2014 6:03 am ] |
| Post subject: | Re: New MAC Exhaust |
| Author: | Mudmotor Slayer [ Wed May 07, 2014 6:29 am ] |
| Post subject: | Re: New MAC Exhaust |
| Author: | cupped up [ Wed May 07, 2014 6:48 am ] |
| Post subject: | Re: New MAC Exhaust |
| Author: | msm8281 [ Wed May 07, 2014 6:52 am ] |
| Post subject: | Re: New MAC Exhaust |
| Author: | cupped up [ Wed May 07, 2014 7:07 am ] |
| Post subject: | Re: New MAC Exhaust |
Better than paying that much moneys for a little bit of tig welded stainless pipe that bolts to a lawn mower motor
|
|
| Author: | eljefe [ Wed May 07, 2014 7:18 am ] |
| Post subject: | Re: New MAC Exhaust |
Exhaust notoriously leak. Every exhaust from stock to mm to instagator has formed a leak and backfired..... vibration is a bitch on exhausts.... it is what it is...... |
|
| Author: | pooldoo73 [ Wed May 07, 2014 2:13 pm ] |
| Post subject: | Re: New MAC Exhaust |
Can't imagine ever buying one of them for anything near that price. Hope it holds up for those that buy them. |
|
| Author: | THE TANK [ Wed May 07, 2014 6:43 pm ] |
| Post subject: | Re: New MAC Exhaust |
Guys buy Marsh mellows and other bands that don't last, from what I see the MAC is better made then all the rest.... Sent from da woods! |
|
| Author: | cupped up [ Wed May 07, 2014 7:14 pm ] |
| Post subject: | Re: New MAC Exhaust |
| Author: | MarshJB [ Wed May 07, 2014 9:39 pm ] |
| Post subject: | Re: New MAC Exhaust |
If you make an exhaust that is to rigid it will be prone to break faster. Just because it's thicker material doesn't necessarily mean it will last longer, you need some give and flex especially with these surface drives. Having an exhaust to stiff could also break the heads at the exhaust ports. It's a fine line, again, time will tell. Ideally you want something light and strong. A titanium exhaust would be the real solution to the mm exhaust issues. It has all the physical properties to work in this application. Sent from my XT1080 using Tapatalk |
|
| Author: | THE TANK [ Thu May 08, 2014 12:28 pm ] |
| Post subject: | Re: New MAC Exhaust |
lol guys are bitching about the price at 550 for the MM and MAC just think titanium! Sent from da woods! |
|
| Author: | MarshJB [ Thu May 08, 2014 12:40 pm ] |
| Post subject: | Re: New MAC Exhaust |
| Author: | tylerduckman [ Sun May 11, 2014 7:23 pm ] |
| Post subject: | Re: New MAC Exhaust |
The MAC's sounds damn nice!! |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|