one day JB, one day.
| MudmotorTalk.com http://mudmotortalk.com/mmt_v2/ |
|
| What my "POS" ran today http://mudmotortalk.com/mmt_v2/viewtopic.php?f=2&t=53036 |
Page 1 of 1 |
| Author: | lunacris [ Tue May 06, 2014 7:11 pm ] |
| Post subject: | What my "POS" ran today |
Loaded down my boat today. heaviest load so far on this rig. Rig: 3 Man GatorTrax Hide w/ MB 52 MAG, Hammer prop motor ran great, had no problem getting on step. at WOT i was able to hit 27mph but crused at 24/25. one the way home this is what i was able to hit 33. my rig is getting faster as my hammer wears. fastest speed I've got so far and got these earlier in the morn |
|
| Author: | BoatDR [ Tue May 06, 2014 7:17 pm ] |
| Post subject: | Re: What my "POS" ran today |
What you building, a clubhouse? |
|
| Author: | lunacris [ Tue May 06, 2014 7:20 pm ] |
| Post subject: | Re: What my "POS" ran today |
building a BIG blind |
|
| Author: | MarshJB [ Tue May 06, 2014 7:24 pm ] |
| Post subject: | Re: What my "POS" ran today |
That's damn good speeds, to bad no reverse. Sent from my XT1080 using Tapatalk |
|
| Author: | lunacris [ Tue May 06, 2014 7:26 pm ] |
| Post subject: | Re: What my "POS" ran today |
one day JB, one day.
|
|
| Author: | MarshJB [ Tue May 06, 2014 7:28 pm ] |
| Post subject: | Re: What my "POS" ran today |
I had four people not including myself this past weekend running 26-27. It shocked the shit outtakes me that I was holding that with that load, took quite a while to plane out though. Sent from my XT1080 using Tapatalk |
|
| Author: | lunacris [ Tue May 06, 2014 7:31 pm ] |
| Post subject: | Re: What my "POS" ran today |
GTR is the fastest stock motor I've ran. i haven't run a PD or GD but i can't imagine their faster |
|
| Author: | MarshJB [ Tue May 06, 2014 7:32 pm ] |
| Post subject: | Re: What my "POS" ran today |
I've got the stage one. I think that the head work is the trick for these cheap Briggs engines. Getting a good seal on the valves helps allot. But that motor you got had a little more ass than a stage 1. Sent from my XT1080 using Tapatalk |
|
| Author: | lunacris [ Tue May 06, 2014 7:33 pm ] |
| Post subject: | Re: What my "POS" ran today |
maybe 
|
|
| Author: | schmitt [ Tue May 06, 2014 7:42 pm ] |
| Post subject: | Re: What my "POS" ran today |
| Author: | lunacris [ Tue May 06, 2014 7:47 pm ] |
| Post subject: | Re: What my "POS" ran today |
yes sir |
|
| Author: | MNGunner [ Tue May 06, 2014 7:52 pm ] |
| Post subject: | Re: What my "POS" ran today |
Gotta be happy with those speeds for sure! |
|
| Author: | DmaxHunter [ Tue May 06, 2014 8:09 pm ] |
| Post subject: | Re: What my "POS" ran today |
I've got my hammer on aswell, hopefully it'll wear in and speed up. Good speeds luna |
|
| Author: | lunacris [ Tue May 06, 2014 8:38 pm ] |
| Post subject: | Re: What my "POS" ran today |
what are you running now? |
|
| Author: | JLACOUR [ Tue May 06, 2014 8:49 pm ] |
| Post subject: | Re: What my "POS" ran today |
Nice luna! |
|
| Author: | tinman454 [ Tue May 06, 2014 9:32 pm ] |
| Post subject: | Re: What my "POS" ran today |
That's some good speeds with that load. One nice thing about the boat is how good they take a load. Have you ever tried a 4 wheeler on the deck? I was thinking it would be able to do it. If so it would be great for the moose hunt. Drive on and drive off. 
|
|
| Author: | BoatDR [ Wed May 07, 2014 7:38 am ] |
| Post subject: | Re: What my "POS" ran today |
| Author: | Smoke [ Wed May 07, 2014 7:59 am ] |
| Post subject: | Re: What my "POS" ran today |
Those are some BA speeds with the load you had on there! I guess I should have went further into my motor when I had it apart? Everyone I talked to told me to build it up to a 5500 but I didn't.  I can always do it later but should have when I installed the cam I was already in there anyway 
|
|
| Author: | cupped up [ Wed May 07, 2014 8:04 am ] |
| Post subject: | Re: What my "POS" ran today |
| Author: | AKA Freshwaterkilla [ Wed May 07, 2014 8:54 am ] |
| Post subject: | Re: What my "POS" ran today |
So when did it run that speed somewhere along the day when u were in a long sweeping turn bc I can't see that barge running that in a straight away in deep water and holding it especially loaded down Sent from my iPhone using |
|
| Author: | JLACOUR [ Wed May 07, 2014 9:15 am ] |
| Post subject: | Re: What my "POS" ran today |
| Author: | lunacris [ Wed May 07, 2014 11:59 am ] |
| Post subject: | Re: What my "POS" ran today |
| Author: | lunacris [ Wed May 07, 2014 12:04 pm ] |
| Post subject: | Re: What my "POS" ran today |
| Author: | cupped up [ Wed May 07, 2014 2:42 pm ] |
| Post subject: | Re: What my "POS" ran today |
| Author: | DUCK HEARSE [ Wed May 07, 2014 5:09 pm ] |
| Post subject: | Re: What my "POS" ran today |
Wish you had gotten a side pic to see how low you were riding |
|
| Author: | zborden25 [ Wed May 07, 2014 8:54 pm ] |
| Post subject: | Re: What my "POS" ran today |
| Author: | North LA Hunter [ Wed May 07, 2014 8:58 pm ] |
| Post subject: | Re: What my "POS" ran today |
We're working on a 28' pontoon boat right now putting a big gate on the front to load rangers and what not on. That thing is going to be a hauling machine when we get it done. Sent from my beeper |
|
| Author: | lunacris [ Wed May 07, 2014 9:10 pm ] |
| Post subject: | Re: What my "POS" ran today |
| Author: | lunacris [ Wed May 07, 2014 9:11 pm ] |
| Post subject: | Re: What my |
| Author: | DmaxHunter [ Wed May 07, 2014 10:23 pm ] |
| Post subject: | Re: What my "POS" ran today |
Luna, was getting 34 with bb, before I wore it out. That was me single hunt load. With hammer 32 light or loaded 32. But it's starting to show a Lil wear. My S5 |
|
| Author: | North LA Hunter [ Thu May 08, 2014 6:40 am ] |
| Post subject: | Re: What my "POS" ran today |
| Author: | lunacris [ Thu May 08, 2014 11:15 am ] |
| Post subject: | Re: What my "POS" ran today |
thats gonna be sweet man. keep the pics coming as you get further along |
|
| Author: | lunacris [ Thu May 08, 2014 11:16 am ] |
| Post subject: | Re: What my "POS" ran today |
| Author: | DmaxHunter [ Thu May 08, 2014 2:29 pm ] |
| Post subject: | Re: What my "POS" ran today |
They are fast, but once the cup is lost, your motor will be over 4600 buried... My S5 |
|
| Author: | flatboat [ Mon May 12, 2014 4:33 pm ] |
| Post subject: | Re: What my "POS" ran today |
ImageUploadedByTapatalk1399933903.785912.jpg Its blurry but thats a load right there. 2 1000 can am's, 2 700 grizzlys, 1 500 forema, and 1 350 rancher. |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|