Tall.
The draft depended on what side of the was up or down!
IMG_7634.JPG
Probably about 6" to 7"
| MudmotorTalk.com http://mudmotortalk.com/mmt_v2/ |
|
| 25 gatortail on36 boat? http://mudmotortalk.com/mmt_v2/viewtopic.php?f=2&t=56765 |
Page 1 of 1 |
| Author: | DuckHunter [ Sat Sep 20, 2014 3:42 pm ] |
| Post subject: | 25 gatortail on36 boat? |
I have a short transom 16x36 1/8' aluminum hull…will a 25 hp gatortail weigh too much to put on the ass end? |
|
| Author: | darrel from meraux [ Sat Sep 20, 2014 4:34 pm ] |
| Post subject: | Re: 25 gatortail on36 boat? |
My buddy has a big block longtail on his that size and they weigh more. I'd say you're safe as long as sides arnt too low |
|
| Author: | JLACOUR [ Sat Sep 20, 2014 4:38 pm ] |
| Post subject: | Re: 25 gatortail on36 boat? |
I had a 27 PD on a 1636. You will be fine. |
|
| Author: | btmannin [ Sat Sep 20, 2014 11:24 pm ] |
| Post subject: | Re: 25 gatortail on36 boat? |
^^ haha there should be a disclaimer at the bottom of every post you make regarding small hulls with heavy motors. It should read something like "let it be known that the aforementioned information is referring to a motor/hull combination that wound up on the bottom of not one, but two bodies of water" |
|
| Author: | North LA Hunter [ Sun Sep 21, 2014 4:32 am ] |
| Post subject: | Re: 25 gatortail on36 boat? |
| Author: | robin2 [ Sun Sep 21, 2014 11:52 am ] |
| Post subject: | Re: 25 gatortail on36 boat? |
Had a 16/36 Welbuilt with a 25GTR. Stock this thing would flat out run. Scared the hell out me though, the guys called it Lil' Peppe. It would run with the 35's . |
|
| Author: | JLACOUR [ Sun Sep 21, 2014 1:17 pm ] |
| Post subject: | Re: 25 gatortail on36 boat? |
| Author: | DuckHunter [ Tue Oct 07, 2014 7:11 pm ] |
| Post subject: | Re: 25 gatortail on36 boat? |
Jlacour Was yours a tall transom or short transom , and how far above the waterline was your hull with the prodrive on it |
|
| Author: | JLACOUR [ Tue Oct 07, 2014 7:21 pm ] |
| Post subject: | Re: 25 gatortail on36 boat? |
Tall. The draft depended on what side of the was up or down! IMG_7634.JPG Probably about 6" to 7" |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|