| MudmotorTalk.com http://mudmotortalk.com/mmt_v2/ |
|
| Been thinking about a bigger rig... http://mudmotortalk.com/mmt_v2/viewtopic.php?f=2&t=56967 |
Page 1 of 2 |
| Author: | duckrunner99 [ Sat Sep 27, 2014 3:53 pm ] |
| Post subject: | Been thinking about a bigger rig... |
So I have been searching a round and if I up grade I have my mind set on a 1754 prodigy v-rake or a 1754 gatortrax hybrid. both boats would have a 35 gtr or a mb sportv 44. what are your thoughts and oppinions on both of these. I like the gatortrax for its turning ability and love the layouts of the prodigys. both are very similar looking so what do you think? |
|
| Author: | brickgw [ Sat Sep 27, 2014 3:58 pm ] |
| Post subject: | Re: Been thinking about a bigger rig... |
Out of the options mentioned above I would say a prodigy with a gtr. |
|
| Author: | 4Cody4 [ Sat Sep 27, 2014 4:53 pm ] |
| Post subject: | Re: Been thinking about a bigger rig... |
| Author: | dillakilla12 [ Sat Sep 27, 2014 5:59 pm ] |
| Post subject: | Re: Been thinking about a bigger rig... |
Yup. Prodigy and gtr. |
|
| Author: | Buzz Killington [ Sat Sep 27, 2014 6:18 pm ] |
| Post subject: | Re: Been thinking about a bigger rig... |
X4 |
|
| Author: | DmaxHunter [ Sat Sep 27, 2014 6:26 pm ] |
| Post subject: | Re: Been thinking about a bigger rig... |
Prodigy is a triple chine just like gator trax. I personally love my 1754 prodigy. You get a Prodigy, you won't be disappointed. |
|
| Author: | mudxxed [ Sat Sep 27, 2014 7:45 pm ] |
| Post subject: | Re: Been thinking about a bigger rig... |
x5 |
|
| Author: | dillakilla12 [ Sat Sep 27, 2014 8:50 pm ] |
| Post subject: | Re: Been thinking about a bigger rig... |
Welp...that's settled! |
|
| Author: | dfou [ Sat Sep 27, 2014 9:00 pm ] |
| Post subject: | Re: Been thinking about a bigger rig... |
| Author: | duckrunner99 [ Sat Sep 27, 2014 9:29 pm ] |
| Post subject: | Re: Been thinking about a bigger rig... |
Hahah no I'm pretty sure gatortrax has a round chine but I think my mind is set thanks for the help |
|
| Author: | VooDoo Daddy [ Sat Sep 27, 2014 9:36 pm ] |
| Post subject: | Re: Been thinking about a bigger rig... |
You said you like the turning ability of the gator trax. Is that important to you? |
|
| Author: | duckrunner99 [ Sat Sep 27, 2014 10:42 pm ] |
| Post subject: | Re: Been thinking about a bigger rig... |
| Author: | DmaxHunter [ Sun Sep 28, 2014 5:36 am ] |
| Post subject: | Re: Been thinking about a bigger rig... |
Round Chine, triple taper chine is about the same when it comes to turning. But yes gt is round and prodigy is taper So excuse me...... for not clarifying |
|
| Author: | VooDoo Daddy [ Sun Sep 28, 2014 7:51 am ] |
| Post subject: | Re: Been thinking about a bigger rig... |
| Author: | DmaxHunter [ Sun Sep 28, 2014 8:15 am ] |
| Post subject: | Re: Been thinking about a bigger rig... |
To the op, if your really worried about turning in trails /timber, a narrower boat would be better. A 54 will not turn like a 48 or 46. Wether it's a Prodigy or Trax, due to more surface area. Now that being said my 54 Prodigy turns very well as long as I have some boat in the water. |
|
| Author: | duckrunner99 [ Sun Sep 28, 2014 12:50 pm ] |
| Post subject: | Re: Been thinking about a bigger rig... |
Will prodigy make a 1650 if you want I really like that lenght and width. I have a1448 right now and I just want a little more lenght and with. |
|
| Author: | North LA Hunter [ Sun Sep 28, 2014 1:08 pm ] |
| Post subject: | Re: Been thinking about a bigger rig... |
| Author: | brickgw [ Sun Sep 28, 2014 1:38 pm ] |
| Post subject: | Re: Been thinking about a bigger rig... |
| Author: | brasso [ Sun Sep 28, 2014 1:42 pm ] |
| Post subject: | Re: Been thinking about a bigger rig... |
I love the turn ability and maneuverability of gator trax… when I decide to get a boat built Im seriously debating on getting round chines due to the fact that it turns so well |
|
| Author: | AKA Freshwaterkilla [ Sun Sep 28, 2014 2:16 pm ] |
| Post subject: | Re: Been thinking about a bigger rig... |
| Author: | duckrunner99 [ Sun Sep 28, 2014 2:27 pm ] |
| Post subject: | Re: Been thinking about a bigger rig... |
| Author: | Pulpwood [ Sun Sep 28, 2014 2:28 pm ] |
| Post subject: | Re: Been thinking about a bigger rig... |
1644 trax with a 35 GTR. Turns on a dime. Narrow trsils, no problem. 4 adults 300, 230, 200, 140, = 23mph open water. 100+ hrs on the motor. Stock |
|
| Author: | AKA Freshwaterkilla [ Sun Sep 28, 2014 2:34 pm ] |
| Post subject: | Re: Been thinking about a bigger rig... |
| Author: | duckrunner99 [ Sun Sep 28, 2014 2:52 pm ] |
| Post subject: | Re: Been thinking about a bigger rig... |
| Author: | brasso [ Sun Sep 28, 2014 4:46 pm ] |
| Post subject: | Re: Been thinking about a bigger rig... |
| Author: | centraltexas [ Sun Sep 28, 2014 8:18 pm ] |
| Post subject: | Re: Been thinking about a bigger rig... |
Would like to see pics of the 1644 w/ 35 gtr . |
|
| Author: | brasso [ Sun Sep 28, 2014 9:50 pm ] |
| Post subject: | Re: Been thinking about a bigger rig... |
Here's a few.. |
|
| Author: | Team_Cut'Em_All [ Mon Sep 29, 2014 11:14 am ] |
| Post subject: | Re: Been thinking about a bigger rig... |
1754 prodigy with the gtr. Hope to place my order here in the next couple months. |
|
| Author: | centraltexas [ Mon Sep 29, 2014 3:12 pm ] |
| Post subject: | Re: Been thinking about a bigger rig... |
Any ever weight problems with the 35 gtr on the back of the 1644 , I just might have to get one. Thanks |
|
| Author: | brasso [ Mon Sep 29, 2014 5:07 pm ] |
| Post subject: | Re: Been thinking about a bigger rig... |
| Author: | chocolate head [ Mon Sep 29, 2014 8:56 pm ] |
| Post subject: | Re: Been thinking about a bigger rig... |
| Author: | brasso [ Mon Sep 29, 2014 9:15 pm ] |
| Post subject: | Re: Been thinking about a bigger rig... |
Mines actually not very heavy... I pushed it about 30 yards on practically dry land and it wasn't near as bad as you would think |
|
| Author: | AKA Freshwaterkilla [ Mon Sep 29, 2014 9:35 pm ] |
| Post subject: | Re: Been thinking about a bigger rig... |
| Author: | brasso [ Tue Sep 30, 2014 1:08 pm ] |
| Post subject: | Re: Been thinking about a bigger rig... |
Again... Your comments hold no weight regardless of the matter.. Your the sites retard. |
|
| Author: | Maclavin [ Tue Sep 30, 2014 7:35 pm ] |
| Post subject: | Re: Been thinking about a bigger rig... |
| Author: | brasso [ Wed Oct 01, 2014 7:55 am ] |
| Post subject: | Re: Been thinking about a bigger rig... |
They are braced a little heavier but it's not much much heavier. They are built like tanks |
|
| Author: | dfou [ Wed Oct 01, 2014 7:57 am ] |
| Post subject: | Re: Been thinking about a bigger rig... |
| Author: | schauv01 [ Wed Oct 01, 2014 8:14 am ] |
| Post subject: | Re: Been thinking about a bigger rig... |
| Author: | DmaxHunter [ Wed Oct 01, 2014 8:23 am ] |
| Post subject: | Re: Been thinking about a bigger rig... |
Is about, this comparison is between all. So a triple and round have more in common than a square. If you try to haul ass around any corner in a true flat is going to slide. No are they exactly the same no, no two boats are |
|
| Author: | brasso [ Wed Oct 01, 2014 8:40 am ] |
| Post subject: | Re: Been thinking about a bigger rig... |
| Page 1 of 2 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|