MudmotorTalk.com http://mudmotortalk.com/mmt_v2/ |
|
hey Maxxis85 http://mudmotortalk.com/mmt_v2/viewtopic.php?f=2&t=72359 |
Page 1 of 1 |
Author: | dead animal [ Sat Apr 21, 2018 3:48 pm ] |
Post subject: | hey Maxxis85 |
hey, you changeout the body mounts on a 2008 f250 before? I got the bushings coming in Monday, but don't know if it's something I want to get into or just pay somebody to do. |
Author: | Will C [ Sun Apr 22, 2018 9:47 am ] |
Post subject: | Re: hey Maxxis85 |
I'm sure Marcus will pop in,,, but I've replaced them, they are not bad. Floor jack and a block of wood will give you room to r&r the mounts. It's usually only the rear mounts that give up. Watch your fingers |
Author: | dead animal [ Sun Apr 22, 2018 6:03 pm ] |
Post subject: | Re: hey Maxxis85 |
thanks will, did you heat up the bolts or just backed them out cold? |
Author: | Will C [ Sun Apr 22, 2018 9:26 pm ] |
Post subject: | Re: hey Maxxis85 |
I did them cold. I wasn't aware if they needed to be heated |
Author: | MaXXis85 [ Mon Apr 23, 2018 7:42 am ] |
Post subject: | Re: hey Maxxis85 |
Ive done them on a few trucks before. I cant recall if the 08-10 was bolt head in can under carpet or not. If so that's the worst part is getting to the bolt head. If its under the truck it's a cake walk The front clip is the trickest one. Pull the front bumper to give room. Fords come apart easy . |
Author: | dead animal [ Mon Apr 23, 2018 11:35 am ] |
Post subject: | Re: hey Maxxis85 |
these all come out from the bottom. I have a ranch hand on the front and can get to the body mount pretty easy. think i'm just gonna get somebody to do it. lol I rather break stuff than fix it!! pm me a price to do it if interested. I got the bushing kit in today. |
Author: | MaXXis85 [ Mon Apr 23, 2018 1:38 pm ] |
Post subject: | Re: hey Maxxis85 |
Author: | dead animal [ Mon Apr 23, 2018 3:44 pm ] |
Post subject: | Re: hey Maxxis85 |
ok, thanks, I will go for it in the am!!!! |
Author: | dead animal [ Mon Apr 23, 2018 6:52 pm ] |
Post subject: | Re: hey Maxxis85 |
got them all loose, started taking the front bolt out and it locked up with about 5 threads left. gonna run it like that till I get somebody to do it. lifes too short to stroke out with that dumb sheet. lol |
Author: | dead animal [ Tue Apr 24, 2018 2:08 pm ] |
Post subject: | Re: hey Maxxis85 |
update... got all of them done but the front one. fixing to go get the sawsall. ordered new one for the am. |
Author: | MaXXis85 [ Wed Apr 25, 2018 6:39 am ] |
Post subject: | Re: hey Maxxis85 |
LOL. Impact and some lube .... |
Author: | dead animal [ Wed Apr 25, 2018 7:18 pm ] |
Post subject: | Re: hey Maxxis85 |
got it all finished up this am. if it weren't for the 1 front body mount the job would of went quick. rides like new again [bad] lol thanks for the help/advice!!!!!! |
Author: | MaXXis85 [ Thu Apr 26, 2018 1:13 pm ] |
Post subject: | Re: hey Maxxis85 |
anytime! |
Page 1 of 1 | All times are UTC - 6 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |