| MudmotorTalk.com http://mudmotortalk.com/mmt_v2/ |
|
| Prodrive Speed help http://mudmotortalk.com/mmt_v2/viewtopic.php?f=2&t=72517 |
Page 1 of 1 |
| Author: | Bigen [ Mon May 28, 2018 6:34 pm ] |
| Post subject: | Prodrive Speed help |
I recently purchased a 1854/32hp prodrive X rig. The boat is super clean and the motor was not running. I now have it running 4200rpm wide open 1300idke rpm out of the water. Once in the water I got 22mph at 3750rpm with 2people. And 11-14mph with 4 grown adults and cooler/gas. Roughly 950pounds. I was not able to break over just plow. Do these speeds sound normal for a 32hp stock prodrive? Can i possibly change props to help get the load on plan? Shouldn’t i try any mods or should I just look for a 36/40hp motor to bolt on the frame? Thank you for any kind of help. I am new to mud motors. |
|
| Author: | Swampin [ Sat Jun 09, 2018 1:11 pm ] |
| Post subject: | Re: Prodrive Speed help |
Speeds probably about right for that load |
|
| Author: | Mallards Only [ Sun Jun 10, 2018 7:13 am ] |
| Post subject: | Re: Prodrive Speed help |
32 is underpowered for that set-up. |
|
| Author: | Russ [ Sun Jun 10, 2018 7:27 am ] |
| Post subject: | Re: Prodrive Speed help |
Don't have this discussion again. Go chime in on the one everyone else commented on. He double posted. #CFFITR #TheGhostBoat #whoneedsphysicsihaveamudmotor |
|
| Author: | Bigen [ Sat Jun 16, 2018 12:15 pm ] |
| Post subject: | Re: Prodrive Speed help |
| Author: | Russ [ Sat Jun 16, 2018 12:54 pm ] |
| Post subject: | Re: Prodrive Speed help |
You're fine, was referring to the guy trying to help. Double posts happen, just no point in diluting the discussion by separating them #CFFITR #TheGhostBoat #whoneedsphysicsihaveamudmotor |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|