I looked and rode in them all in the last 10 months and I went with the GatorTail Xtreme
Just my 2 cent,Good Luck!
| MudmotorTalk.com http://mudmotortalk.com/mmt_v2/ |
|
| Hulls? http://mudmotortalk.com/mmt_v2/viewtopic.php?f=2&t=7380 |
Page 1 of 1 |
| Author: | Labs4Life [ Tue Jan 26, 2010 10:00 pm ] |
| Post subject: | Hulls? |
Wats a fast out of the box hull that can take sum abuse prlly stirring the pot with this ? but most ? on here do that have at it! |
|
| Author: | The Shafer [ Tue Jan 26, 2010 10:11 pm ] |
| Post subject: | Re: Hulls? |
pm aucoin on here. He's building me a hull right now. They are fast and you can get them with a 3/16 bottom which will take the beating of our east texas stumps. |
|
| Author: | Labs4Life [ Tue Jan 26, 2010 10:16 pm ] |
| Post subject: | Re: Hulls? |
Ya im in wisconsion only bad thing long drive! I was looking at excel or gator trx |
|
| Author: | Gigafowl [ Tue Jan 26, 2010 10:30 pm ] |
| Post subject: | Re: Hulls? |
Well - it's not just the hull but the combo of hull and motor... Little details of exact transom height - transom angle - rolled transom or a trailing edge square transom - weight - rigidity - etc etc etc... For me - I enjoy the 16 foot GDSD tapered chine and stock 35 GDSD which puts you into the 30 mph club - with reliability... |
|
| Author: | Labs4Life [ Tue Jan 26, 2010 10:45 pm ] |
| Post subject: | Re: Hulls? |
Im running a hd 4000 from mud buddy minkuni carb k&n air filter makes it a 40 from a 35 had it on a jon boat last year but dont wanna keep pounding on that! |
|
| Author: | Gigafowl [ Tue Jan 26, 2010 10:59 pm ] |
| Post subject: | Re: Hulls? |
| Author: | Labs4Life [ Tue Jan 26, 2010 11:49 pm ] |
| Post subject: | Re: Hulls? |
I have been looking for a hull since september i have looked and read so many things i am lost but i like the look and layout of the new excels! |
|
| Author: | JIMMY W [ Wed Jan 27, 2010 7:52 am ] |
| Post subject: | Re: Hulls? |
I looked and rode in them all in the last 10 months and I went with the GatorTail Xtreme Just my 2 cent,Good Luck!
|
|
| Author: | Labs4Life [ Wed Jan 27, 2010 3:43 pm ] |
| Post subject: | Re: Hulls? |
Ya how would that work running a mud buddy on a gator tail? |
|
| Author: | JIMMY W [ Wed Jan 27, 2010 5:37 pm ] |
| Post subject: | Re: Hulls? |
| Author: | indybill [ Wed Jan 27, 2010 7:42 pm ] |
| Post subject: | Re: Hulls? |
PM Deadbird he runs an excel with mudbuddy motors and he can answer your questions . Very . |
|
| Author: | OwenDickeson [ Wed Jan 27, 2010 7:43 pm ] |
| Post subject: | Re: Hulls? |
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|