| MudmotorTalk.com http://mudmotortalk.com/mmt_v2/ |
|
| Prodrive Winch Trim http://mudmotortalk.com/mmt_v2/viewtopic.php?f=2&t=8696 |
Page 1 of 1 |
| Author: | cb5331 [ Sat Mar 27, 2010 8:06 pm ] |
| Post subject: | Prodrive Winch Trim |
Any of you guys still running the old style winch trim? I would like to see some close up pictures of how its done. How the winch is mounted, and how the cable hooks to the motor. I have a winch I could use if it was relatively inexpensive to adapt it to the motor. 500 bucks for the hydro is kinda steep right now. I tried searching and found a few pics, but nothing I could see clearly. |
|
| Author: | dead animal [ Sat Mar 27, 2010 8:59 pm ] |
| Post subject: | Re: Prodrive Winch Trim |
if u got the trim wheel, remove it and the winch cable goes through the hole, around the bar, and back into the front peice.. if i can remember i'll take a pic tomorrow. |
|
| Author: | cb5331 [ Sat Mar 27, 2010 9:04 pm ] |
| Post subject: | Re: Prodrive Winch Trim |
A pic would be great. I was trying to see how exactly the winch was oriented, and if I was gonna need some type of bracket. Thanks. |
|
| Author: | cb5331 [ Sun Mar 28, 2010 9:34 am ] |
| Post subject: | Re: Prodrive Winch Trim |
Anybody? |
|
| Author: | dead animal [ Sun Mar 28, 2010 9:34 am ] |
| Post subject: | Re: Prodrive Winch Trim |
here's what mine looks like. my frome ia a 2004 or a pre 2004, so the one u have may look a little differant, but it will be close. if u call pd they will sell u whatever hardware u need and talk u thru doing it. good luck. |
|
| Author: | dead animal [ Sun Mar 28, 2010 9:35 am ] |
| Post subject: | Re: Prodrive Winch Trim |
be sure to use the synthetic rope, it last alot longer than the stainless cable. |
|
| Author: | cb5331 [ Sun Mar 28, 2010 9:36 am ] |
| Post subject: | Re: Prodrive Winch Trim |
Awesome, thanks man! I'll be sure to get the synthetic rope. |
|
| Author: | bombdude [ Sun Mar 28, 2010 9:39 pm ] |
| Post subject: | Re: Prodrive Winch Trim |
| Author: | Full Throttle [ Mon Mar 29, 2010 6:11 am ] |
| Post subject: | Re: Prodrive Winch Trim |
DA, on the synthetic rope, what do you use as a stop on the end of the rope? |
|
| Author: | dead animal [ Mon Mar 29, 2010 11:36 am ] |
| Post subject: | Re: Prodrive Winch Trim |
| Author: | cb5331 [ Mon Mar 29, 2010 2:09 pm ] |
| Post subject: | Re: Prodrive Winch Trim |
Well so much for that. Prodrive doesn't carry the parts for them anymore. I'm sure I could fab up a bracket, but the roller on the backside would be what I'd be worried about. I was thinking I could just tie it off on the back hole, but was worried about it chafing. Any ideas? |
|
| Author: | Wilson [ Tue Mar 30, 2010 12:02 am ] |
| Post subject: | Re: Prodrive Winch Trim |
Which bracket are you talking about? |
|
| Author: | cb5331 [ Tue Mar 30, 2010 7:10 am ] |
| Post subject: | Re: Prodrive Winch Trim |
The one on the right would be the most important. You looking to get rid of that setup? I figured we could make the bracket to hold the winch up, but the roller on the trim arm looked pretty important. |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|