| Author |
Message |
|
JphIII
MMT Pro Member
Joined: Sun Nov 02, 2014 8:23 am
Posts: 308
|
 Delta performance packages milder than level 3? Just curious as to whether Delta offers a performance package that is more mild than the level 3? 3k is a lot for a motor upgrade no matter which way you swing it. Maybe just heads, valves, rods, rockers, exhaust, and tuner? That would be a nice little package an give some nice performance, could go in an add cam later if you wanted more. Would be nice to have something around a grand if you already had a decent exhaust.
_________________
PD 1754 X Series and a PD 37EFI
|
| Thu Sep 15, 2016 8:50 am |
|
|
|
North LA Hunter
MMT Elite Member
Joined: Mon Aug 02, 2010 8:39 pm
Posts: 6976
Location: West Monroe, LA
|
Re: Delta performance packages milder than level 3? Well heads and exhaust alone would put you well over a grand.
Not sure if the offer it but you can buy everything separate.
Sent from my beeper
|
| Thu Sep 15, 2016 9:43 am |
|
|
|
JphIII
MMT Pro Member
Joined: Sun Nov 02, 2014 8:23 am
Posts: 308
|
Re: Delta performance packages milder than level 3? I have an exhaust, should have mentioned that. Heads, rockers, rods, and tuner then?
_________________
PD 1754 X Series and a PD 37EFI
|
| Thu Sep 15, 2016 9:58 am |
|
|
|
Russ
MMT 1000 Club
Joined: Mon Dec 31, 2012 11:07 pm
Posts: 4820
Location: West Monroe, LA
|
Re: Delta performance packages milder than level 3? Why go rods? Why not heads and efi tune, and cam? That'll be far more useful as a complete recipe than not having a cam to improve fuel/air characteristics with the valve timing. The flow improvement from the headwork will be better realized by getting the cam. Going with rods increases compression, which can be done with headwork. Doing both adds cost, but doesn't gain anything that can't be done with only headwork. Since you need the port work and should do the heads anyway, skip the rods.
|
| Thu Sep 15, 2016 10:37 am |
|
|
|
JphIII
MMT Pro Member
Joined: Sun Nov 02, 2014 8:23 am
Posts: 308
|
Re: Delta performance packages milder than level 3? Not connector rods, just pushrods I meant.
_________________
PD 1754 X Series and a PD 37EFI
|
| Thu Sep 15, 2016 10:58 am |
|
|
|
Will C
MMT Sponsor
Joined: Fri Jan 10, 2014 1:16 pm
Posts: 2107
Location: Gladewater TX
|
Re: Delta performance packages milder than level 3? I think he is meaning push rods?/////// nevermind
|
| Thu Sep 15, 2016 10:58 am |
|
|
|
TPerkins
MMT 1000 Club
Joined: Wed Jan 02, 2013 12:59 pm
Posts: 1793
Location: Clear Lake, Tx
|
Re: Delta performance packages milder than level 3? They have a level 2, tune, heads, exhaust.
Sent from my SM-G920V using Tapatalk
|
| Thu Sep 15, 2016 11:31 am |
|
|
|
kirk
MMT F.E.
Joined: Thu Apr 18, 2013 5:52 pm
Posts: 870
Location: SW LA
|
Re: Delta performance packages milder than level 3?
|
| Thu Sep 15, 2016 2:48 pm |
|
|
|
TPerkins
MMT 1000 Club
Joined: Wed Jan 02, 2013 12:59 pm
Posts: 1793
Location: Clear Lake, Tx
|
Re: Delta performance packages milder than level 3? I have the level 3
Sent from my SM-G920V using Tapatalk
|
| Thu Sep 15, 2016 4:58 pm |
|
|
|
Will
MMT Elite Member
Joined: Fri Jul 08, 2011 1:54 pm
Posts: 8133
|
Re: Delta performance packages milder than level 3? I guess level 1 is just an O2 sensor. Hehehe
_________________
Before the internet, the majority of the village idiots stayed in their villages.
|
| Thu Sep 15, 2016 6:25 pm |
|
|
|
