MudmotorTalk.com
http://mudmotortalk.com/mmt_v2/

Beer Can Thickness
http://mudmotortalk.com/mmt_v2/viewtopic.php?f=3&t=10235		 Page 1 of 1
Author:  quackconsumer [ Mon Jun 14, 2010 9:32 am ]
Post subject:  Beer Can Thickness
Has anyone ever measured da thickness of an alluminum 10oz. Miller Lite can?
I need to know if I should go buy a feeller gauge or if I can just use a piece of beer can to set my valves.
Author:  JBREAUX [ Mon Jun 14, 2010 9:47 am ]
Post subject:  Re: Beer Can Thickness
LOL dude if its that bad i can let you borrow some!
Author:  POKER1 [ Mon Jun 14, 2010 9:49 am ]
Post subject:  Re: Beer Can Thickness
No chit. They run about .99c at the autoparts store,,,,,,,,,,,,,,,,,
Author:  backwaterballer [ Mon Jun 14, 2010 10:09 am ]
Post subject:  Re: Beer Can Thickness
You didn't like the eye gauge I put on it in the water. Lol
Author:  MaXXis85 [ Mon Jun 14, 2010 10:14 am ]
Post subject:  Re: Beer Can Thickness
Feeler gague.... go buy one neg.
Author:  coondik [ Mon Jun 14, 2010 10:15 am ]
Post subject:  Re: Beer Can Thickness
i think a beer bottle would work better!
Author:  MaXXis85 [ Mon Jun 14, 2010 10:25 am ]
Post subject:  Re: Beer Can Thickness
Author:  balloon-knot [ Mon Jun 14, 2010 1:48 pm ]
Post subject:  Re: Beer Can Thickness
Two pubic hairs from a Red Head is exaclty .0005
Author:  take'emgator [ Mon Jun 14, 2010 2:02 pm ]
Post subject:  Re: Beer Can Thickness
Author:  quackconsumer [ Mon Jun 14, 2010 7:04 pm ]
Post subject:  Re: Beer Can Thickness
Author:  coondik [ Mon Jun 14, 2010 7:26 pm ]
Post subject:  Re: Beer Can Thickness
i was eye'n BWB's custom pipes saturday, he did a hell of a job on dose too! dey sounded great & looked 1st class.
Author:  backwaterballer [ Mon Jun 14, 2010 8:29 pm ]
Post subject:  Re: Beer Can Thickness
Ya I don't blame ya I was about a 12 pack deep at that point. Beer goes down alot easier when you don't have to drive. Thanks coondik those pipes came a long way had to do some custom work to them but I really like the way they turned out too.
Author:  postalpaul [ Wed Jun 16, 2010 6:17 pm ]
Post subject:  Re: Beer Can Thickness
BWB got any pic's of those pipe's?
Author:  backwaterballer [ Wed Jun 16, 2010 6:46 pm ]
Post subject:  Re: Beer Can Thickness
I don't know how to post pics from an iPhone. But I'll try to get some pics up.
Author:  postalpaul [ Wed Jun 16, 2010 6:51 pm ]
Post subject:  Re: Beer Can Thickness
Thanks man I am looking at building my owns also
Author:  backwaterballer [ Wed Jun 16, 2010 7:00 pm ]
Post subject:  Re: Beer Can Thickness
Really mine are just modified gecker pipes. I just don't tell anyone that because I don't want people thinkin gecker does quality work like that. If you could find some stainless round mufflers you could make a bad arse set.
Author:  postalpaul [ Fri Jun 18, 2010 5:50 pm ]
Post subject:  Re: Beer Can Thickness
dont tell anyone I think im gonna try some tractor muffler's--powder coated. dont need that ****** shiny shit on my rig
Author:  backwaterballer [ Fri Jun 18, 2010 9:45 pm ]
Post subject:  Re: Beer Can Thickness
Ya if you don't run salt like me stainless isn't that important
Author:  backwaterballer [ Sat Jun 19, 2010 8:53 pm ]
Post subject:  Re: Beer Can Thickness
This is my pipes they were tweaked a lil bit after this picture because one didnt match the other. but you get the point.
Author:  THA [ Sun Jun 20, 2010 3:42 pm ]
Post subject:  Re: Beer Can Thickness
wanted to check out the redhead hair thing so I just went out and found a redhead. Plucking the hairs led to other things. Will let you guys know in about an hour or two if that is correct diminsions. To hell with beer can


BTW, don't let wife know, she's a blonde
Page 1 of 1 All times are UTC - 6 hours
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/