| MudmotorTalk.com http://mudmotortalk.com/mmt_v2/ |
|
| Heads question??? http://mudmotortalk.com/mmt_v2/viewtopic.php?f=3&t=10326 |
Page 1 of 1 |
| Author: | dabuckmaster24 [ Thu Jun 17, 2010 8:09 pm ] |
| Post subject: | Heads question??? |
Does anybody know the valve clearance of a 35 gtr??? Also is there a specific torque on the bolts of the heads??? Thanks for any help |
|
| Author: | craig [ Thu Jun 17, 2010 8:12 pm ] |
| Post subject: | Re: Heads question??? |
set em at 0.003 -0.004. |
|
| Author: | dabuckmaster24 [ Thu Jun 17, 2010 8:21 pm ] |
| Post subject: | Re: Heads question??? |
You know what torque to put on the bolts of the heads??? |
|
| Author: | coondik [ Thu Jun 17, 2010 8:23 pm ] |
| Post subject: | Re: Heads question??? |
| Author: | deadbird8 [ Fri Jun 18, 2010 2:14 am ] |
| Post subject: | Re: Heads question??? |
With stock rockers the setting is 0.004-0.006 lower for speed, higher for load carrying but 0.005 splits the difference. The head torque is 350in lbs or 40 Nm Get the bolts snug and then use a star torque sequence bottom left, middle top, bottom right, top left, middle bottom, top right |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|