| MudmotorTalk.com http://mudmotortalk.com/mmt_v2/ |
|
| Backfiring? http://mudmotortalk.com/mmt_v2/viewtopic.php?f=3&t=12459 |
Page 1 of 1 |
| Author: | cajunpride318 [ Sat Sep 18, 2010 2:01 pm ] |
| Post subject: | Backfiring? |
i hav a 35 gtr, mikuni carb, mm exhaust. everytime while its turning over to start it backfires loud, then starts? any tips would be great |
|
| Author: | deadbird8 [ Sun Sep 19, 2010 4:01 am ] |
| Post subject: | Re: Backfiring? |
back your pilot air mixture screw out to 2 full turns (seat it and then back it out 2 revolutions). |
|
| Author: | cajunpride318 [ Wed Sep 22, 2010 8:14 am ] |
| Post subject: | Re: Backfiring? |
thers a brass screw an a long coated flex screw which one needs to be where |
|
| Author: | sedlmayrje1723 [ Wed Sep 22, 2010 2:49 pm ] |
| Post subject: | Re: Backfiring? |
Brass screw on the tiller handle side of the carb. Screw it all the way in like he said and then two full turns out. |
|
| Author: | cajunpride318 [ Thu Sep 23, 2010 7:27 am ] |
| Post subject: | Re: Backfiring? |
yes i do understand that but, under that screw ther is a long coated flex screw, that i also tampered with can someone give the setting for it. |
|
| Author: | shooter [ Thu Sep 23, 2010 9:01 am ] |
| Post subject: | Re: Backfiring? |
My 32 PD, prolly 2007-2008 year model, is backfiring too. The only screw I can see is the one that limits the top end speed. There is a fat aluminum disc that looks like it could be hiding the mixture screw under it, it's at the base of the carb on the tiller handle side. Didn't wanna poke a hole in something that needs to stay there, but if my mixture screw is stowed away in there I got no problem goin thru it. Poke, or pass? |
|
| Author: | caddobrook [ Thu Sep 23, 2010 9:10 am ] |
| Post subject: | Re: Backfiring? |
| Author: | shooter [ Thu Sep 23, 2010 9:50 am ] |
| Post subject: | Re: Backfiring? |
| Author: | deadbird8 [ Thu Sep 23, 2010 8:40 pm ] |
| Post subject: | Re: Backfiring? |
| Author: | cajunpride318 [ Sat Sep 25, 2010 4:14 pm ] |
| Post subject: | Re: Backfiring? |
k thanks guys |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|