Author |
Message |
basinlover
MMT Pro Member
Joined: Mon Mar 09, 2009 12:24 pm Posts: 279 Location: DE Jeanerette, LA.
|
Rope Start
Anybody ever tryed to make a rope start for 36 briggs. Every time I go frogging always have to bring extra battery or small generator in case. Know it will be hard but what happens if all else fails!
_________________ There is no replacement for displacement!!!!
|
Fri Mar 27, 2009 9:39 am |
|
|
DUCKSBANE
MMT Pro Member
Joined: Mon Feb 23, 2009 8:13 pm Posts: 121
|
Re: Rope Start
Wish mine had one!
_________________ 1860 Phowler Extreme W/ stage 1 36 PD
|
Fri Mar 27, 2009 11:29 am |
|
|
basinlover
MMT Pro Member
Joined: Mon Mar 09, 2009 12:24 pm Posts: 279 Location: DE Jeanerette, LA.
|
Re: Rope Start
will start working on one let you know soon
_________________ There is no replacement for displacement!!!!
|
Fri Mar 27, 2009 11:46 am |
|
|
slambin
MMT 1000 Club
Joined: Mon Feb 16, 2009 10:21 pm Posts: 1262 Location: St. Francisville, LA
|
Re: Rope Start
This may seem stupid but would you need some kind of compression release to use the rope start. I know how much my arm hurts after pulling on the rope for my four-wheeler when the release does not engage.
_________________ 2060 CC 3/4 Gator-tail 1/4 Brother Breaux Boat /35GTR Cowboy thought- a thong on a woman is like a barbed wire fence. It protects the property but doesnt obstruct the view.
|
Fri Mar 27, 2009 11:51 am |
|
|
River
MMT 1000 Club
Joined: Wed Jan 14, 2009 8:34 am Posts: 1092 Location: Unaffiliated, SETX group has caused me to renounce my Texas Citizenship
|
Re: Rope Start
I made this request on another thread, but it seems to apply here as well. PLEASE film this and post results on youtube
_________________ "Democracy is two wolves and a lamb voting on what to have for lunch. Liberty is a well-armed lamb contesting the outcome of the vote."-Benjamin Franklin
|
Fri Mar 27, 2009 11:55 am |
|
|
slambin
MMT 1000 Club
Joined: Mon Feb 16, 2009 10:21 pm Posts: 1262 Location: St. Francisville, LA
|
Re: Rope Start
_________________ 2060 CC 3/4 Gator-tail 1/4 Brother Breaux Boat /35GTR Cowboy thought- a thong on a woman is like a barbed wire fence. It protects the property but doesnt obstruct the view.
|
Fri Mar 27, 2009 11:57 am |
|
|
basinlover
MMT Pro Member
Joined: Mon Mar 09, 2009 12:24 pm Posts: 279 Location: DE Jeanerette, LA.
|
Re: Rope Start
I know what your saying but you have to look at the diameter of the rope pulley on a three wheeler it is small and to make one to fit a briggs would be about 2 to 3 times larger which gives the puller three times more tourque. Just think of the pull rope on 50 fourstoke outboards. about the same size. im going to cnc machine a disk that would fit in place of the screen on the flywheel that you could rap a small rope like the one that comes from outboard manfactures as a last resort and make it so you have to remove the first screen on the cover with wings nuts to get to.
_________________ There is no replacement for displacement!!!!
|
Fri Mar 27, 2009 11:59 am |
|
|
slambin
MMT 1000 Club
Joined: Mon Feb 16, 2009 10:21 pm Posts: 1262 Location: St. Francisville, LA
|
Re: Rope Start
_________________ 2060 CC 3/4 Gator-tail 1/4 Brother Breaux Boat /35GTR Cowboy thought- a thong on a woman is like a barbed wire fence. It protects the property but doesnt obstruct the view.
|
Fri Mar 27, 2009 12:02 pm |
|
|
basinlover
MMT Pro Member
Joined: Mon Mar 09, 2009 12:24 pm Posts: 279 Location: DE Jeanerette, LA.
|
Re: Rope Start
River how do you search for this topic for past post! want to learn as much as possible.
_________________ There is no replacement for displacement!!!!
|
Fri Mar 27, 2009 12:06 pm |
|
|
slambin
MMT 1000 Club
Joined: Mon Feb 16, 2009 10:21 pm Posts: 1262 Location: St. Francisville, LA
|
Re: Rope Start
_________________ 2060 CC 3/4 Gator-tail 1/4 Brother Breaux Boat /35GTR Cowboy thought- a thong on a woman is like a barbed wire fence. It protects the property but doesnt obstruct the view.
|
Fri Mar 27, 2009 12:12 pm |
|
|
basinlover
MMT Pro Member
Joined: Mon Mar 09, 2009 12:24 pm Posts: 279 Location: DE Jeanerette, LA.
|
Re: Rope Start
thanks
_________________ There is no replacement for displacement!!!!
|
Fri Mar 27, 2009 12:14 pm |
|
|
MaXXis85
MMT Elite Member
Joined: Wed Jan 14, 2009 7:23 am Posts: 6233 Location: Tarkington, TX
|
Re: Rope Start
_________________ Bayou Surface Drive 337-351-0362 Tarkington, TX 77327
|
Fri Mar 27, 2009 12:21 pm |
|
|
slambin
MMT 1000 Club
Joined: Mon Feb 16, 2009 10:21 pm Posts: 1262 Location: St. Francisville, LA
|
Re: Rope Start
_________________ 2060 CC 3/4 Gator-tail 1/4 Brother Breaux Boat /35GTR Cowboy thought- a thong on a woman is like a barbed wire fence. It protects the property but doesnt obstruct the view.
|
Fri Mar 27, 2009 12:24 pm |
|
|
LOWRY
MMT Pro Member
Joined: Wed Jan 14, 2009 7:18 am Posts: 296
|
Re: Rope Start
Looks to me like you would be better off to take a jumper box or a lawn tractor battery. Gonna wear your arm out trying to pull start one that big.
Better come up with a real good way to secure that metal disc to the flywheel, could get real nasty if it came loose at WOT
_________________ OneBigAssMistakeAmerica
|
Fri Mar 27, 2009 10:45 pm |
|
|
Mark F. Cheney
MMT Pro Member
Joined: Sat Mar 07, 2009 9:44 am Posts: 154 Location: Bountiful, Utah
|
Re: Rope Start
Do you rember cranking your first couple of cars? Or maby your tractor. Buy a good battery and do the maintance on your charging system and enjoy your startr motor.
Mark F. Cheney
_________________ on the Great Salt Lake marsh
|
Sat Mar 28, 2009 3:01 am |
|
|
Divinduck
MMT Pro Member
Joined: Wed Jan 14, 2009 5:48 pm Posts: 63 Location: Huntin and Spearfishin
|
Re: Rope Start
The pull rope will not do you any good, the carb needs 12vdc for fuel !! Get a jumper box
_________________ 18x48 Brother Breaux bateau wit a Stage 1 PD
|
Sat Mar 28, 2009 8:14 am |
|
|
idabilly
MMT Addict
Joined: Sat Jan 17, 2009 7:17 pm Posts: 617 Location: Idaho
|
Re: Rope Start
Ditto on the jumper box X10. Has saved my butt a few times.
|
Sat Mar 28, 2009 8:27 am |
|
|
stumpgrinder
MMT 1000 Club
Joined: Thu Jan 15, 2009 1:04 pm Posts: 1438
|
Re: Rope Start
_________________ I'm your Huckleberry......... http://www.youtube.com/watch?v=XqVe3xG-wos
I am proud to be an American, I am glad that I am free... but right now I wish I was a dog, and Obama was a tree.
|
Sat Mar 28, 2009 8:28 am |
|
|
bayouboy
MMT Elite Member
Joined: Tue Jan 13, 2009 6:08 pm Posts: 5376 Location: Venice, La
|
Re: Rope Start
I know my 36 has never started on the first revolution it usually takes three to four before she'll fire up, while at the same time holding the throttle wide open. Should be interesting. Good Luck!
|
Sat Mar 28, 2009 8:32 am |
|
|
stumpgrinder
MMT 1000 Club
Joined: Thu Jan 15, 2009 1:04 pm Posts: 1438
|
Re: Rope Start
_________________ I'm your Huckleberry......... http://www.youtube.com/watch?v=XqVe3xG-wos
I am proud to be an American, I am glad that I am free... but right now I wish I was a dog, and Obama was a tree.
|
Sat Mar 28, 2009 8:52 am |
|
|
Divinduck
MMT Pro Member
Joined: Wed Jan 14, 2009 5:48 pm Posts: 63 Location: Huntin and Spearfishin
|
Re: Rope Start
_________________ 18x48 Brother Breaux bateau wit a Stage 1 PD
|
Sat Mar 28, 2009 9:58 am |
|
|
bayouboy
MMT Elite Member
Joined: Tue Jan 13, 2009 6:08 pm Posts: 5376 Location: Venice, La
|
Re: Rope Start
|
Sat Mar 28, 2009 12:51 pm |
|
|
bayouboy
MMT Elite Member
Joined: Tue Jan 13, 2009 6:08 pm Posts: 5376 Location: Venice, La
|
Re: Rope Start
|
Sat Mar 28, 2009 12:58 pm |
|
|
bayouboy
MMT Elite Member
Joined: Tue Jan 13, 2009 6:08 pm Posts: 5376 Location: Venice, La
|
Re: Rope Start
basinlover you might want to think about it a little more. before you go killing yourself . LOL
|
Sat Mar 28, 2009 1:09 pm |
|
|
tchredneck
MMT 1000 Club
Joined: Tue Jan 13, 2009 7:39 pm Posts: 1812 Location: in the woods,la
|
Re: Rope Start
its alot harder than it sounds, and theres alot better ways to go about this subject to make it work
_________________ 27 Contender twin 200's for sale 18x42 B.B skiff Lil daddy 36 pd Fighting da Koolaid brigade since 07'
|
Sat Mar 28, 2009 2:22 pm |
|
|
tchredneck
MMT 1000 Club
Joined: Tue Jan 13, 2009 7:39 pm Posts: 1812 Location: in the woods,la
|
Re: Rope Start
like stumpy said that dead battery that doesnt have enough power to roll the motor over has plenty of juice left to get a spark,
ben- call me when you can I have top secrete sensative classified info to share with you involving this subject
_________________ 27 Contender twin 200's for sale 18x42 B.B skiff Lil daddy 36 pd Fighting da Koolaid brigade since 07'
|
Sat Mar 28, 2009 2:24 pm |
|
|
bayouboy
MMT Elite Member
Joined: Tue Jan 13, 2009 6:08 pm Posts: 5376 Location: Venice, La
|
Re: Rope Start
Ben call me after you call hunter I think he's tryin to steal my idea! lol
|
Sat Mar 28, 2009 5:59 pm |
|
|
stumpgrinder
MMT 1000 Club
Joined: Thu Jan 15, 2009 1:04 pm Posts: 1438
|
Re: Rope Start
I'm offshore. Y'all both gotta wait. lol
_________________ I'm your Huckleberry......... http://www.youtube.com/watch?v=XqVe3xG-wos
I am proud to be an American, I am glad that I am free... but right now I wish I was a dog, and Obama was a tree.
|
Sat Mar 28, 2009 6:06 pm |
|
|
bayouboy
MMT Elite Member
Joined: Tue Jan 13, 2009 6:08 pm Posts: 5376 Location: Venice, La
|
Re: Rope Start
|
Sat Mar 28, 2009 6:12 pm |
|
|
stumpgrinder
MMT 1000 Club
Joined: Thu Jan 15, 2009 1:04 pm Posts: 1438
|
Re: Rope Start
workin 7&7 out of Houma, offshore about 1/2 da week, in Houma when not offshore.... I'm at Atlantis right now, was supposed to come in today but da helicopter broke. I'll stay out of trouble out here anyways.... and wake up feeling much better. lol
_________________ I'm your Huckleberry......... http://www.youtube.com/watch?v=XqVe3xG-wos
I am proud to be an American, I am glad that I am free... but right now I wish I was a dog, and Obama was a tree.
|
Sat Mar 28, 2009 6:43 pm |
|
|
craig
MMT Elite Member
Joined: Tue Jan 13, 2009 7:53 pm Posts: 7515 Location: Chauvin
|
Re: Rope Start
Hey stump, i was just out at DD2 a couple days ago, right next door.
_________________ 1750 GatorTail Extreme/Stage 3 37 GTR HD Procrastination is a lot like masturbation. Sure it sounds great at the time but, in the end your only f--k--g yourself.
|
Sat Mar 28, 2009 6:54 pm |
|
|
stumpgrinder
MMT 1000 Club
Joined: Thu Jan 15, 2009 1:04 pm Posts: 1438
|
Re: Rope Start
Movin to Thunderhorse today for a night....
_________________ I'm your Huckleberry......... http://www.youtube.com/watch?v=XqVe3xG-wos
I am proud to be an American, I am glad that I am free... but right now I wish I was a dog, and Obama was a tree.
|
Sun Mar 29, 2009 5:53 am |
|
|
|