| MudmotorTalk.com http://mudmotortalk.com/mmt_v2/ |
|
| 05 31 hyperdrive trim http://mudmotortalk.com/mmt_v2/viewtopic.php?f=3&t=13345 |
Page 1 of 1 |
| Author: | tp10 [ Tue Oct 26, 2010 1:25 pm ] |
| Post subject: | 05 31 hyperdrive trim |
I had not run my boat in about two weeks and when I launched yesterday to go scout I had no trim. I checked all the connections and everything was good any ideas?? |
|
| Author: | marshmaster [ Tue Oct 26, 2010 6:06 pm ] |
| Post subject: | Re: 05 31 hyperdrive trim |
Could you here it click or could you here the breaker trip and reset? |
|
| Author: | rbeck [ Tue Oct 26, 2010 7:13 pm ] |
| Post subject: | Re: 05 31 hyperdrive trim |
I had a 06 mb 35 and went throught 2 trim units in 4 years. Good luck. |
|
| Author: | tp10 [ Tue Oct 26, 2010 7:50 pm ] |
| Post subject: | Re: 05 31 hyperdrive trim |
It doesnt make any noise at all. It just acts like its not getting power but all the connections are good. Im going to work on it tomm and see what i can find. |
|
| Author: | marshmaster [ Tue Oct 26, 2010 8:42 pm ] |
| Post subject: | Re: 05 31 hyperdrive trim |
Check the easy stuff first like the breaker and the switch I had to rebuild mine water got into the electric motor and did a number Post up what ya find out |
|
| Author: | tp10 [ Sun Oct 31, 2010 6:20 pm ] |
| Post subject: | Re: 05 31 hyperdrive trim |
well all the connections and everything are good....the motor is good but the contacts are corroded really bad and dont get power very well anymore. Is it possible to buy new contacts or am I going to have to buy a new motor? |
|
| Author: | Bream Busta [ Sun Oct 31, 2010 7:59 pm ] |
| Post subject: | Re: 05 31 hyperdrive trim |
Pour coke on the cotacts to get the corrosion off of them. |
|
| Author: | Woodiebuster [ Sun Oct 31, 2010 8:02 pm ] |
| Post subject: | Re: 05 31 hyperdrive trim |
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|