MudmotorTalk.com http://mudmotortalk.com/mmt_v2/ |
|
Engine Service Question http://mudmotortalk.com/mmt_v2/viewtopic.php?f=3&t=15739 |
Page 1 of 1 |
Author: | bubbadye [ Mon Jan 31, 2011 9:16 pm ] |
Post subject: | Engine Service Question |
Hey guys, I've got a 35hp Mudbuddy that I am wanting to get serviced before summer. I'm located in southern middle TN and am looking for a good service center to take it to. Also looking at putting some dual exhausts on as well. Do they add any extra power or do I need to just go with a single stainless muffler. I guess my main question is where would ya'll recommend me taking my rig to get a service job. Don't mind a little drive, but not some day long trip. I just want it done right. Thanks for any help. |
Author: | Chico80x [ Tue Feb 01, 2011 11:26 pm ] |
Post subject: | Re: Engine Service Question |
There's really nothing to it that you can't do yourself as far as routine maintenance goes. Just buy the belt tension tool from MB and get a feeler gauge at any auto parts store and that's pretty much all you need. The rest can be done with basic hand tools. |
Author: | deadbird8 [ Wed Feb 02, 2011 5:29 am ] |
Post subject: | Re: Engine Service Question |
There are a lot of detailed posts on MB service on the MB forum. |
Author: | tlsmith22 [ Wed Feb 02, 2011 6:51 pm ] |
Post subject: | Re: Engine Service Question |
If you must take it to a dealer, Mud Creek Marine in Fackler, Alabama would be pretty close. It is about 45 minutes from Chattanooga and less than 2 hours to Nashville. They are a good bunch of people. |
Author: | HUNT4DEER [ Wed Feb 02, 2011 8:38 pm ] |
Post subject: | Re: Engine Service Question |
ive got the tension tool. grab a filter and oil and come to pulaski ill help you out. where about south middle tn are you? db8, how many hours betweem valve adjust? |
Author: | Chico80x [ Wed Feb 02, 2011 9:25 pm ] |
Post subject: | Re: Engine Service Question |
DB told me once that he checks his valve clearance during every oil change. |
Author: | bubbadye [ Wed Feb 02, 2011 9:45 pm ] |
Post subject: | Re: Engine Service Question |
Appreciate the help guys. I would usually try to do it all myself, but I bought this setup this past summer used, and I really just want it gone completely over and serviced by somebody that knows more about it than I do. ![]() |
Author: | deadbird8 [ Thu Feb 03, 2011 5:01 am ] |
Post subject: | Re: Engine Service Question |
Page 1 of 1 | All times are UTC - 6 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |