| MudmotorTalk.com http://mudmotortalk.com/mmt_v2/ |
|
| gt throttle cable http://mudmotortalk.com/mmt_v2/viewtopic.php?f=3&t=16242 |
Page 1 of 1 |
| Author: | swampmonkey [ Fri Feb 18, 2011 9:22 am ] |
| Post subject: | gt throttle cable |
when i went to change the throttle cable on my gator tail gtr35, i found the new one i bought (for a go devil surface drive) has a smaller end connection (to the linkages behind the air filter). the original/oem cable on my gator tail is much thicker/beefier. see the picture - go devil on left & gator tail on right. is it fine to use the new cable i bought w/ the smaller end connection? thanks |
|
| Author: | dog walker [ Fri Feb 18, 2011 9:41 am ] |
| Post subject: | Re: gt throttle cable |
I'm not sure but being that its smaller it may come out of the bracket easier. Try it out and see |
|
| Author: | swampmonkey [ Fri Feb 18, 2011 9:43 am ] |
| Post subject: | Re: gt throttle cable |
rather get it rt the 1st time & was gonna return the new/go devil one if it's wrong/not as good. thx |
|
| Author: | dog walker [ Fri Feb 18, 2011 9:45 am ] |
| Post subject: | Re: gt throttle cable |
Stick it in the hole and see if it comes out easily while moving it |
|
| Author: | autogateman [ Fri Feb 18, 2011 9:46 am ] |
| Post subject: | Re: gt throttle cable |
| Author: | DeathMetalDukk [ Fri Feb 18, 2011 8:15 pm ] |
| Post subject: | Re: gt throttle cable |
| Author: | swampmonkey [ Thu Feb 24, 2011 1:40 pm ] |
| Post subject: | Re: gt throttle cable |
| Author: | dguidry [ Thu Feb 24, 2011 1:47 pm ] |
| Post subject: | Re: gt throttle cable |
I replaced my throttle cable on my gTR23, with an oem one from gatortail. I had to shave the end of the linkage hook so it would clear the rotating throttle assembly piece. |
|
| Author: | Tailin'inWI [ Mon Feb 28, 2011 8:45 pm ] |
| Post subject: | Re: gt throttle cable |
The GD throttle cables break a lot easier, obviously because it is smaller in diameter. I have broken 2 on my GD 35 already. They like to break right after the L on the end. It will work but will be more likely to break. |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|