MudmotorTalk.com http://mudmotortalk.com/mmt_v2/ |
|
29 vangaurd http://mudmotortalk.com/mmt_v2/viewtopic.php?f=3&t=16469 |
Page 1 of 1 |
Author: | duckkiller [ Sat Feb 26, 2011 10:05 pm ] |
Post subject: | 29 vangaurd |
i have 29 with exaust would it be worth getting a carb kit for it or just save my money and what kind of power gain would i get from it its on a longtail |
Author: | cb5331 [ Sun Feb 27, 2011 10:05 am ] |
Post subject: | Re: 29 vangaurd |
I wouldn't bother with it. If you want to do a lil something, have your heads done. Your probably bout due for a good valve job anyway. It's a lot less money and fixes something that likely needs to be fixed anyway. I wouldn't waste 700 bucks on a carb kit for a longtail, but that's just me. |
Author: | Woodiebuster [ Sun Feb 27, 2011 1:06 pm ] |
Post subject: | Re: 29 vangaurd |
Author: | cb5331 [ Sun Feb 27, 2011 3:30 pm ] |
Post subject: | Re: 29 vangaurd |
Author: | pooldoo73 [ Sun Feb 27, 2011 3:37 pm ] |
Post subject: | Re: 29 vangaurd |
A valve job would be the best route. I just had new heads put on my 36. You could see daylight around ~70% of one of the intake valves. My motor only had 45 hours on it. Apparently, Briggs doesn't seat the valves, they just assemble the heads and bolt them on. |
Author: | deadbird8 [ Sun Feb 27, 2011 5:40 pm ] |
Post subject: | Re: 29 vangaurd |
Its the same block as a 35, see if the folks with blown motors will sell you the crank,get the stock pistons/c-rods from people that have replaced theirs, stock carbs and intakes from folks that have modded, etc... You can get 6HP for probably less than $700. |
Author: | Woodiebuster [ Sun Feb 27, 2011 8:17 pm ] |
Post subject: | Re: 29 vangaurd |
Author: | cb5331 [ Sun Feb 27, 2011 8:19 pm ] |
Post subject: | Re: 29 vangaurd |
If I buy a bigger block, its not likely to be a briggs ![]() |
Author: | bowfishingnut [ Sun Feb 27, 2011 8:52 pm ] |
Post subject: | Re: 29 vangaurd |
Author: | cb5331 [ Sun Feb 27, 2011 8:53 pm ] |
Post subject: | Re: 29 vangaurd |
Author: | bowfishingnut [ Sun Feb 27, 2011 9:19 pm ] |
Post subject: | Re: 29 vangaurd |
the cam should be diff too correct? |
Author: | cb5331 [ Sun Feb 27, 2011 9:25 pm ] |
Post subject: | Re: 29 vangaurd |
Author: | drake1 [ Mon Feb 28, 2011 6:32 am ] |
Post subject: | Re: 29 vangaurd |
The short stroke 29,31,and 32 responde really well to mods. My favorite till my Generac was a 31HP modded out. |
Page 1 of 1 | All times are UTC - 6 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |