does anyone know the part # for the universal throttle for a 42mm mikuni or maybe a link to the drag specialties site for the kit.. i looked around on there but don't know the exact kit to get. any help appreciated, thanks

Been awhile, I think this was the one I used, I think they make a black one also.......

Had to custom order the cable from motion pro in california, got the reference # somewhere at home, unless hoyt's got some that'll work now?

Single pull for mikuni HSR, cable was at least 52"min I think, 54" might be perfect , like $28 a couple years back .

thanks rc!

that link RC posted looks like it Rick... I ordered 2 when I got mine so I'd have a spare, I'll check it when I get home and get da part #. I used RC's reference # and ordered my cable from Motion Pro.... need to order another one cuz mines got a few bad spots on it now. Might wanna order u 2 of 'em so you'll have a spare.

Try #112727 as a reference for motion pro....if that don't work, let me konw, I'll check again.

That's the throttle grip.. I'm thinkin the cable was shorter than 52" RC.. I'm thinkin I got either 48" or 50" and it was perfect.. Course I can't find all the email confirmation stuff since I got a new pc..

Mine was 52", the harley shops had a 48" one, but it wouldn 't reach...... drilled a hole & moved the choke pull thing to the inside of the tiller control box, then ran the throttle cable through the old hole, along the fuel filter, down by the valve cover, up and over the cowling to the front of the carb. Black taped the end of the tiller, with the one part left on it, so it wouldn't spin.

good info guys , thanks again