| MudmotorTalk.com http://mudmotortalk.com/mmt_v2/ |
|
| bps rods http://mudmotortalk.com/mmt_v2/viewtopic.php?f=3&t=20542 |
Page 1 of 1 |
| Author: | garrettpearce [ Mon Aug 01, 2011 6:40 pm ] |
| Post subject: | bps rods |
has anyone have any feedback on bps rods do they hold up and to what rpm? |
|
| Author: | garrettpearce [ Mon Aug 01, 2011 7:03 pm ] |
| Post subject: | Re: bps rods |
connecting rods |
|
| Author: | Team Camo [ Mon Aug 01, 2011 7:21 pm ] |
| Post subject: | Re: bps rods |
I, along with everyone running a Mag 45 or larger is running them. I've only got ~60+ hrs on this one so far, but no problems yet. |
|
| Author: | DuckHunterF250 [ Mon Aug 01, 2011 7:47 pm ] |
| Post subject: | Re: bps rods |
didnt have any problems out of the ones i had on the 7000, 70 hrs at almost always between 4800-5000 rpms. im also putting em in my new motor |
|
| Author: | garrettpearce [ Mon Aug 01, 2011 7:49 pm ] |
| Post subject: | Re: bps rods |
not many hours though |
|
| Author: | DuckHunterF250 [ Mon Aug 01, 2011 7:50 pm ] |
| Post subject: | Re: bps rods |
| Author: | garrettpearce [ Mon Aug 01, 2011 7:54 pm ] |
| Post subject: | Re: bps rods |
lol i hear that |
|
| Author: | take'emgator [ Mon Aug 01, 2011 8:45 pm ] |
| Post subject: | Re: bps rods |
FIxing to put them in my motor! |
|
| Author: | garrettpearce [ Mon Aug 01, 2011 9:05 pm ] |
| Post subject: | Re: bps rods |
i want to build a motor that is going to turn up but dont want it to blow up within 50 hours. anyone have a few hundred hours on bps rods? |
|
| Author: | take'emgator [ Mon Aug 01, 2011 9:11 pm ] |
| Post subject: | Re: bps rods |
Put a rev box with a toggle switch, when your in the mudd flip the switch so youdon't over rev, other than that flip it off and run all you want across open water....this is my intentions |
|
| Author: | garrettpearce [ Mon Aug 01, 2011 9:12 pm ] |
| Post subject: | Re: bps rods |
good idea |
|
| Author: | DuckHunterF250 [ Mon Aug 01, 2011 9:13 pm ] |
| Post subject: | Re: bps rods |
i havent seen any motor with busted bps rods anywhere unless i missed a thread somewhere. |
|
| Author: | garrettpearce [ Mon Aug 01, 2011 9:14 pm ] |
| Post subject: | Re: bps rods |
thats good to knowi thinkim going to go with them i mean they are eagle right? |
|
| Author: | DuckHunterF250 [ Mon Aug 01, 2011 9:18 pm ] |
| Post subject: | Re: bps rods |
| Author: | take'emgator [ Mon Aug 01, 2011 9:19 pm ] |
| Post subject: | Re: bps rods |
I can't wait |
|
| Author: | garrettpearce [ Mon Aug 01, 2011 9:20 pm ] |
| Post subject: | Re: bps rods |
stock length takem |
|
| Author: | take'emgator [ Mon Aug 01, 2011 9:21 pm ] |
| Post subject: | Re: bps rods |
Yeah going to be stock length, Gonna build it pretty radical but ima put a toggle swtich for the rev box for when i get in the good stuff and flip it off to fly across open water |
|
| Author: | DuckHunterF250 [ Mon Aug 01, 2011 9:23 pm ] |
| Post subject: | Re: bps rods |
| Author: | take'emgator [ Mon Aug 01, 2011 9:24 pm ] |
| Post subject: | Re: bps rods |
I'll certainly keep that in mind 250, other than that i'm ready to see that motor of yours put out some RPMS, cody is gonna build you a hell uv ah motor |
|
| Author: | garrettpearce [ Mon Aug 01, 2011 9:25 pm ] |
| Post subject: | Re: bps rods |
what all do you have in mind for your build |
|
| Author: | DuckHunterF250 [ Mon Aug 01, 2011 9:27 pm ] |
| Post subject: | Re: bps rods |
| Author: | take'emgator [ Mon Aug 01, 2011 9:28 pm ] |
| Post subject: | Re: bps rods |
cam, rods, pistons, RR, valves, push rods, lifters, and of course some inbetween things to help out |
|
| Author: | garrettpearce [ Mon Aug 01, 2011 9:30 pm ] |
| Post subject: | Re: bps rods |
all bps? |
|
| Author: | Robn1020 [ Mon Aug 01, 2011 10:02 pm ] |
| Post subject: | Re: bps rods |
| Author: | Team Camo [ Mon Aug 01, 2011 11:47 pm ] |
| Post subject: | Re: bps rods |
Same things mine has, short of Cody heads. |
|
| Author: | Brinkleydog [ Tue Aug 02, 2011 9:09 am ] |
| Post subject: | Re: bps rods |
| Author: | Team Camo [ Tue Aug 02, 2011 9:26 am ] |
| Post subject: | Re: bps rods |
| Author: | Migrator [ Tue Aug 02, 2011 11:40 am ] |
| Post subject: | Re: bps rods |
| Author: | garrettpearce [ Tue Aug 02, 2011 11:55 am ] |
| Post subject: | Re: bps rods |
i meam they are eagle ive heard all there prducts are good |
|
| Author: | take'emgator [ Tue Aug 02, 2011 11:56 am ] |
| Post subject: | Re: bps rods |
They are, you can't go wrong! Just got the ball rolling on my build! Gonna be interesting for sure |
|
| Author: | deadbird8 [ Wed Aug 03, 2011 6:16 pm ] |
| Post subject: | Re: bps rods |
| Author: | drake1 [ Wed Aug 03, 2011 7:04 pm ] |
| Post subject: | Re: bps rods |
| Author: | Migrator [ Wed Aug 03, 2011 10:37 pm ] |
| Post subject: | Re: bps rods |
Some crackheads can tear up an anvil w/ a rubber hammer. When you go extreme you get extreme consequences. No pun intended w/ the word extreme. |
|
| Author: | Brinkleydog [ Thu Aug 04, 2011 6:52 am ] |
| Post subject: | Re: bps rods |
No conspiracy theory just an honest observation. Everything bearks just some more than others. You ever seen a post of any of Hoyts mishaps, what about BPS over on MB forum, ever hear about any EVT problems on any board (mine not included) It’s just the way it is my friend. You saying there have been no problems should tell you that they have kept it quite. Later |
|
| Author: | Team Camo [ Thu Aug 04, 2011 5:21 pm ] |
| Post subject: | Re: bps rods |
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|