MudmotorTalk.com
http://mudmotortalk.com/mmt_v2/

Carb Cover for PD
http://mudmotortalk.com/mmt_v2/viewtopic.php?f=3&t=2093		 Page 1 of 1
Author:  Gatorpoint [ Thu May 14, 2009 3:52 pm ]
Post subject:  Carb Cover for PD
While I was down there a couple weeks ago, I had Brother fab up a carb cover for my engine. After some bending and cutting, here is what he came up with. He cut a radius around the fan and attached it to the screws which hold the fan guard on. It can easily be cut to shape for personal preference. The pics are from my cell phone so they arent the best quality.
Author:  Wilson [ Thu May 14, 2009 4:23 pm ]
Post subject:  Re: Carb Cover for PD
Is that for storage or hitting trees?
Author:  Brinkleydog [ Thu May 14, 2009 6:02 pm ]
Post subject:  Re: Carb Cover for PD
That's an ugly morther forker.......if I get off my fat ass ill get u one bent up that make u think Aucoin done put the smack down on it.......

u ran it yet.....wondered how much heat u holdn in under that cover without vents...

FYI....tham bugs last weekend was show nuff good size.
Author:  Gatorpoint [ Thu May 14, 2009 7:48 pm ]
Post subject:  Re: Carb Cover for PD
Author:  bayouboy [ Thu May 14, 2009 8:30 pm ]
Post subject:  Re: Carb Cover for PD
I just ordered the carb. kit today, mainly because i lost everything except the metal backing plate day before yesterday and thats only because its bolted to the carb.!! :( filter, metal disk, platic cover,and both nuts all fell into the drink. Can't see buyin replacement parts and having to ride around with a bungee cord just to make sure it doesn't happen again.

I was thinking of the exact same thing you did Paul when i get it. Nice job! I have an idea for filter protection in reverse as well.
Author:  SwampSnyper [ Thu May 14, 2009 8:42 pm ]
Post subject:  Re: Carb Cover for PD
GP....With all these trips to La., when it comes time for the La Mud Run I don't want any excuses. :shock:

The cover is ok by the way, kind looks like one of those bicycle racing helmets. Bet Basinhunter has one. :mrgreen:
Author:  POKER1 [ Thu May 14, 2009 8:50 pm ]
Post subject:  Re: Carb Cover for PD
Author:  BROOKS [ Thu May 14, 2009 8:53 pm ]
Post subject:  Re: Carb Cover for PD
Good idea and I likes it !!!! :D





Bet you run into all sorts of thangs .... out in that Parkin' Lot !!!! :mrgreen:


BoatLaneBiss !!!!!! :lol:
Author:  bayouboy [ Thu May 14, 2009 9:13 pm ]
Post subject:  Re: Carb Cover for PD
Author:  POKER1 [ Thu May 14, 2009 9:21 pm ]
Post subject:  Re: Carb Cover for PD
Both times mine broke was after a long run on rough water.
Author:  Gatorpoint [ Thu May 14, 2009 9:23 pm ]
Post subject:  Re: Carb Cover for PD
Author:  drake1 [ Fri May 15, 2009 5:49 am ]
Post subject:  Re: Carb Cover for PD
Take that rev limiter off the motor and put it somewhere in the boat.
Author:  Divinduck [ Fri May 15, 2009 7:33 am ]
Post subject:  Re: Carb Cover for PD
[quote="bayouboy"]I just ordered the carb. kit today, mainly because i lost everything except the metal backing plate day before yesterday and thats only because its bolted to the carb.!! :( filter, metal disk, platic cover,and both nuts all fell into the drink. Can't see buyin replacement parts and having to ride around with a bungee cord just to make sure it doesn't happen again.

Hey BB, sounds like you steppin up a bit in power :)

You may wanna build that exhaust now to help that new carb flow better.

ifin you buyin a new prop you might as well the the Hopkins 12x14 for the rpm and sand... Good luck and I'll come see what ya done when I come down.
Author:  bayouboy [ Fri May 15, 2009 6:19 pm ]
Post subject:  Re: Carb Cover for PD
Author:  Divinduck [ Fri May 15, 2009 7:40 pm ]
Post subject:  Re: Carb Cover for PD
Author:  bayouboy [ Sat May 16, 2009 5:49 pm ]
Post subject:  Re: Carb Cover for PD
Good deal! Thats what I'll do then, Really appreciate the exhaust pipe and muffler Jimmy Boy!! I'm gonna start cutting it open when I get home. ;)
Page 1 of 1 All times are UTC - 6 hours
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/