| MudmotorTalk.com http://mudmotortalk.com/mmt_v2/ |
|
| cdi motor gov. adjustment http://mudmotortalk.com/mmt_v2/viewtopic.php?f=3&t=25345 |
Page 1 of 1 |
| Author: | brianb [ Sat Dec 31, 2011 9:36 am ] |
| Post subject: | cdi motor gov. adjustment |
I was reading another post where someone stated you need to adjust your govenor to 4200 , I didn't want to jack their post so Is this possible How is it done I have heard the cdi motors are preset for that rpm but mine at wot in nuetral is about 3850 |
|
| Author: | deadbird8 [ Sat Dec 31, 2011 10:40 am ] |
| Post subject: | Re: cdi motor gov. adjustment |
Your motor is not adjusted right if you only get 3850 OOW. Make sure your throttle cable is giving you full travel on the throttle and turn the governor adjustment screw clockwise to adjust the RPM up. On a CDI, the coils have a built in 4300 rev limiter so you can set the governor to 4300 OOW. |
|
| Author: | brianb [ Sat Dec 31, 2011 3:49 pm ] |
| Post subject: | Re: cdi motor gov. adjustment |
thanks for the info and also the detailed picture, also, those pipes on your motor look good from what i could see |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|