MudmotorTalk.com
http://mudmotortalk.com/mmt_v2/

CAMO PAINT JOB
http://mudmotortalk.com/mmt_v2/viewtopic.php?f=3&t=26192		 Page 1 of 2
Author:  catfish16020 [ Sun Jan 29, 2012 5:15 pm ]
Post subject:  CAMO PAINT JOB
Looking for camo paint job ideas Any one try any stencle kitts that you find on line?
Author:  Bayoublackhunter [ Sun Jan 29, 2012 5:41 pm ]
Post subject:  Re: CAMO PAINT JOB
I got mine off Ebay, I had mine made

Sent from my Evo 4G 3D
Author:  deadbird8 [ Sun Jan 29, 2012 6:30 pm ]
Post subject:  Re: CAMO PAINT JOB
Styx River MOSG
Author:  greg f [ Sun Jan 29, 2012 7:04 pm ]
Post subject:  Re: CAMO PAINT JOB
Author:  scatters boy 316 [ Sun Jan 29, 2012 7:29 pm ]
Post subject:  Re: CAMO PAINT JOB
Author:  med [ Sun Jan 29, 2012 7:35 pm ]
Post subject:  Re: CAMO PAINT JOB
Styxriver natgear
Author:  greg f [ Sun Jan 29, 2012 8:42 pm ]
Post subject:  Re: CAMO PAINT JOB
My advice is if you buy the styx river stencils, buy 2 sets. They get loaded up w/ paint and they're not easy to clean as you go along. I painted my hull w/ the shadow grass and mine came out good but the 1 above came out much cleaner.
Author:  greg f [ Sun Jan 29, 2012 8:43 pm ]
Post subject:  Re: CAMO PAINT JOB
Oh, nice job med......looks good.
Author:  deadbird8 [ Sun Jan 29, 2012 9:14 pm ]
Post subject:  Re: CAMO PAINT JOB
Author:  SammyC [ Sun Jan 29, 2012 10:25 pm ]
Post subject:  Re: CAMO PAINT JOB
I also can't say enough good about styxx stencils. Thanks med...
Author:  Fall Flight [ Wed Feb 08, 2012 10:48 am ]
Post subject:  Re: CAMO PAINT JOB
MOSG from Styx River. Wish I could paint as good as DB
Author:  Z71v2.0 [ Wed Feb 08, 2012 5:12 pm ]
Post subject:  Re: CAMO PAINT JOB


Did this with a rattle can.
Author:  DirtNasty [ Wed Feb 08, 2012 8:37 pm ]
Post subject:  Re: CAMO PAINT JOB
How are yall prepping the aluminium? Ive hread something about using an etching primer???
Author:  take'emgator [ Wed Feb 08, 2012 8:41 pm ]
Post subject:  Re: CAMO PAINT JOB
Sent mine off and had it done, easiest paint job i've ever done and come out top notch
Author:  duckduckboom [ Wed Feb 08, 2012 9:28 pm ]
Post subject:  Re: CAMO PAINT JOB
Author:  DirtNasty [ Thu Feb 09, 2012 8:02 am ]
Post subject:  Re: CAMO PAINT JOB
Author:  dfou [ Thu Feb 09, 2012 8:30 am ]
Post subject:  CAMO PAINT JOB
Don't sandblast. Just scuff it up with sandpaper and make sure you get all the loose paint off then clean it good and apply new paint
Author:  CJB [ Thu Feb 09, 2012 9:23 am ]
Post subject:  Re: CAMO PAINT JOB
Author:  lastchance [ Thu Feb 09, 2012 10:01 am ]
Post subject:  Re: CAMO PAINT JOB
X3 Sand blasting also makes the bottom of the boat rough and causes loss of speed!
Author:  centxhunter [ Thu Feb 09, 2012 10:53 am ]
Post subject:  Re: CAMO PAINT JOB
These paint jobs look fantastic. Question: On the camo paint on the engines, doesn't that sh*t get hot and burn or somoke? I know you don't do the pipes, but even some of the other parts.. sure look great though. Not sure how you get the stencil pattern so well defined in all the nooks and crannies? Outdrive is easy(er).
Author:  mcduffws [ Thu Feb 09, 2012 12:17 pm ]
Post subject:  Re: CAMO PAINT JOB
Styxx River is the way to go
Author:  WestEndAngler [ Thu Feb 09, 2012 1:57 pm ]
Post subject:  Re: CAMO PAINT JOB
I'm sending mine off in a few months to get repainted. Going to go with a clear coat like many others have done.
Author:  DirtNasty [ Thu Feb 09, 2012 2:25 pm ]
Post subject:  Re: CAMO PAINT JOB
Clear coat?? Please explain..
Author:  take'emgator [ Thu Feb 09, 2012 2:29 pm ]
Post subject:  Re: CAMO PAINT JOB
Some camo places throw a protective coating on there that sort of looks like clear coat i have it on my boat, very easy to wash mudd off and it looks real nice, not a whole lot of glare when hunting.
Author:  cb5331 [ Thu Feb 09, 2012 2:30 pm ]
Post subject:  Re: Re: CAMO PAINT JOB
Author:  take'emgator [ Thu Feb 09, 2012 2:31 pm ]
Post subject:  Re: CAMO PAINT JOB
Oh and i forgot, it doesn't fade, if it does i bring it back and they will repaiint it

I got some pics hang on
Author:  WestEndAngler [ Thu Feb 09, 2012 2:47 pm ]
Post subject:  Re: Re: CAMO PAINT JOB
Author:  OwenDickeson [ Thu Feb 09, 2012 2:52 pm ]
Post subject:  CAMO PAINT JOB
Camo Designs uses a satin clear on most boats.
Author:  WestEndAngler [ Thu Feb 09, 2012 2:54 pm ]
Post subject:  Re: CAMO PAINT JOB
Author:  OwenDickeson [ Thu Feb 09, 2012 2:57 pm ]
Post subject:  CAMO PAINT JOB
It's all in the technique of how you spray it that determines how glossy or flat it comes out in the end.
Author:  brasso [ Thu Feb 09, 2012 3:55 pm ]
Post subject:  Re: CAMO PAINT JOB
Author:  whytry85 [ Thu Feb 09, 2012 6:35 pm ]
Post subject:  Re: CAMO PAINT JOB

Real foot stencil
Author:  djjm67 [ Mon Feb 20, 2012 6:32 am ]
Post subject:  Re: CAMO PAINT JOB
I was also wondering about the paint on the engine itself. Was wanting to paint my prodrive but wasnt sure if I needed to use some sort of heat paint. Haven't really seen any of the the colors that u would want for camp in a heat paint.
Author:  med [ Mon Feb 20, 2012 6:48 am ]
Post subject:  Re: Re: CAMO PAINT JOB
Author:  DeathMetalDukk [ Mon Feb 20, 2012 6:58 am ]
Post subject:  Re: Re: CAMO PAINT JOB
Author:  OwenDickeson [ Mon Feb 20, 2012 7:41 am ]
Post subject:  Re: Re: CAMO PAINT JOB
Author:  med [ Mon Feb 20, 2012 8:04 am ]
Post subject:  Re: CAMO PAINT JOB
Yeah I know. I just figured if you had a flat clear that it would be flat when applied regardless of technique.
Author:  greg f [ Tue Feb 21, 2012 5:55 pm ]
Post subject:  Re: CAMO PAINT JOB
When you spray the flat clears if you don't get a completely even coat it can look a little glossier in certain areas.
Author:  Z71v2.0 [ Thu Feb 23, 2012 11:44 pm ]
Post subject:  Re: CAMO PAINT JOB
Author:  brasso [ Thu Feb 23, 2012 11:53 pm ]
Post subject:  Re: CAMO PAINT JOB
You have any more pics of It?
Page 1 of 2 All times are UTC - 6 hours
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/