MudmotorTalk.com
http://mudmotortalk.com/mmt_v2/

pushrods question
http://mudmotortalk.com/mmt_v2/viewtopic.php?f=3&t=27343		 Page 1 of 1
Author:  freonjohn [ Sat Mar 03, 2012 5:03 pm ]
Post subject:  pushrods question
Installing iron mountain heads and i am having a brainfart- :o --
Is the exhaust pushrod the thicker one of the two pushrods?

why is it thicker anyway?

Thanks.
Author:  autogateman [ Sat Mar 03, 2012 5:08 pm ]
Post subject:  Re: pushrods question
theyre all the same
Author:  autogateman [ Sat Mar 03, 2012 5:09 pm ]
Post subject:  Re: pushrods question
at least i thought so
Author:  freonjohn [ Sat Mar 03, 2012 5:10 pm ]
Post subject:  Re: pushrods question
there is defiently a size difference. By the way this is for a 23hp vanguard
Author:  deadbird8 [ Sat Mar 03, 2012 6:17 pm ]
Post subject:  Re: pushrods question
Post a picture, I expect they should all be the same.
Author:  autogateman [ Sat Mar 03, 2012 6:48 pm ]
Post subject:  Re: pushrods question
Thanks Cody, I didnt know that.
Author:  freonjohn [ Sat Mar 03, 2012 7:53 pm ]
Post subject:  Re: pushrods question
found it. vanguard v-twins--- aluminum pushrod = exhaust
steel pushrod = intake

I guess the 35 hp engines have the same pushrods for both intake and exhaust
Author:  Team Camo [ Sat Mar 03, 2012 8:04 pm ]
Post subject:  Re: pushrods question
Correct, 35 are the same. On a 23, the larger (fatter) rod is for exhaust side.
Author:  dguidry [ Sat Mar 03, 2012 8:45 pm ]
Post subject:  Re: pushrods question
Author:  OwenDickeson [ Sat Mar 03, 2012 8:50 pm ]
Post subject:  Re: pushrods question
The intake guidry, the intake.
Author:  dguidry [ Sat Mar 03, 2012 9:06 pm ]
Post subject:  Re: pushrods question
Yes, but just in case he did not know I used the proximity reference.
Author:  deadbird8 [ Sun Mar 04, 2012 4:36 am ]
Post subject:  Re: pushrods question
Page 1 of 1 All times are UTC - 6 hours
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/