| MudmotorTalk.com http://mudmotortalk.com/mmt_v2/ |
|
| GDSD owners please read http://mudmotortalk.com/mmt_v2/viewtopic.php?f=3&t=27439 |
Page 1 of 1 |
| Author: | autogateman [ Tue Mar 06, 2012 5:49 pm ] |
| Post subject: | GDSD owners please read |
I am considering designing a lever of some sort that mounts by the front of the engine to actuate the quick trim. I need to know first if there is a demand for this before I spend time and money designing one. I will try to keep it simple, ( I know thats how yall like things LOL) and low cost as possible. Please chime in and let me know if this is something you would be interested in. Thanks, Rod |
|
| Author: | chaseh [ Tue Mar 06, 2012 5:54 pm ] |
| Post subject: | GDSD owners please read |
Don't waste your time. It ain't that far back there! |
|
| Author: | autogateman [ Tue Mar 06, 2012 6:01 pm ] |
| Post subject: | Re: GDSD owners please read |
I think the guys running a gdsd on a huntdeck may disagree |
|
| Author: | freonjohn [ Tue Mar 06, 2012 6:10 pm ] |
| Post subject: | Re: GDSD owners please read |
what would be slick if you could build a mounting bracket with a 12 volt linear actuator(only need 4-6" stroke) to go in place of the manual trim knob and install a toggle switch near handle to operate. I know GDSD are balanced drive/dont need trim bla bla bla but it would still be kinda cool to have trim. linear actuators are cheap -- 100-150.00 |
|
| Author: | autogateman [ Tue Mar 06, 2012 6:16 pm ] |
| Post subject: | Re: GDSD owners please read |
thought about that when i had one, but theres not enough clearance for the actuator.best thing to would be to buy a cmc or panther universal trim . |
|
| Author: | chaseh [ Tue Mar 06, 2012 7:07 pm ] |
| Post subject: | GDSD owners please read |
| Author: | Bayoublackhunter [ Tue Mar 06, 2012 7:54 pm ] |
| Post subject: | Re: Re: GDSD owners please read |
| Author: | shallow water master [ Tue Mar 06, 2012 10:03 pm ] |
| Post subject: | Re: GDSD owners please read |
what about something up by the handle |
|
| Author: | CootSlayerRMFT [ Tue Mar 06, 2012 11:41 pm ] |
| Post subject: | Re: GDSD owners please read |
| Author: | Salad Shoota [ Wed Mar 07, 2012 1:40 am ] |
| Post subject: | GDSD owners please read |
| Author: | autogateman [ Wed Mar 07, 2012 11:42 pm ] |
| Post subject: | GDSD owners please read |
Ok this idea is scratched. On to the next thing. |
|
| Author: | Bayoublackhunter [ Thu Mar 08, 2012 9:42 am ] |
| Post subject: | Re: Re: GDSD owners please read |
| Author: | Woodiebuster [ Thu Mar 08, 2012 7:34 pm ] |
| Post subject: | Re: GDSD owners please read |
You shoulda known that you can't improve a GDSD |
|
| Author: | dpd [ Thu Mar 08, 2012 7:57 pm ] |
| Post subject: | Re: GDSD owners please read |
| Author: | Robn1020 [ Thu Mar 08, 2012 8:38 pm ] |
| Post subject: | Re: GDSD owners please read |
Sorry Rod! It really is pretty easy to reach back and drop it. Im sure it was a good idea but theres really not much to the motors. Pretty simple. But mine isn't a huntdeck so.... |
|
| Author: | Salad Shoota [ Thu Mar 08, 2012 10:32 pm ] |
| Post subject: | GDSD owners please read |
| Author: | Bayoublackhunter [ Fri Mar 09, 2012 2:09 am ] |
| Post subject: | Re: Re: GDSD owners please read |
| Author: | Gameover [ Fri Mar 09, 2012 7:05 am ] |
| Post subject: | Re: GDSD owners please read |
[/quote] Considering getting one for my next rig. Keeping my Prodrive too though. I'm greedy like that. Lol.[/quote] Mount them both oh the back of the boat. Have the first Dual Brand Dual Motors  therfore you have 1.5 FPR and instant reverse best of all worlds |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|