MudmotorTalk.com
http://mudmotortalk.com/mmt_v2/

cam or heads?
http://mudmotortalk.com/mmt_v2/viewtopic.php?f=3&t=31259		 Page 1 of 1
Author:  gmc [ Sun Aug 05, 2012 7:49 pm ]
Post subject:  cam or heads?
i have a mikuni carb and marshmellow exhaust on my 35 gtr and was wondering if the better upgrade would be heads r cam?
Author:  cb5331 [ Sun Aug 05, 2012 7:52 pm ]
Post subject:  Re: cam or heads?
Heads first.
Author:  koonce727 [ Sun Aug 05, 2012 7:52 pm ]
Post subject:  Re: cam or heads?
both.... but since its only one, i would go with the heads.
Author:  gmc [ Sun Aug 05, 2012 7:55 pm ]
Post subject:  Re: cam or heads?
im gettin 29 empty 27 with 3 ppl n dogg jus wanted sme extra hp for mud and lillies
Author:  Podcast [ Sun Aug 05, 2012 8:00 pm ]
Post subject:  cam or heads?
Heads.
Author:  craig [ Sun Aug 05, 2012 8:34 pm ]
Post subject:  cam or heads?
Heads
Author:  DuckHunter251 [ Sun Aug 05, 2012 8:41 pm ]
Post subject:  Re: cam or heads?
Deffentley heads.
Author:  270Handiman [ Sun Aug 05, 2012 9:14 pm ]
Post subject:  Re: cam or heads?
Damn.........everybody agrees on something? This can't be good!

But definitely heads first. Leaking valves are to common on the stock motors so you have to do the heads first to make sure you're not losing power there before you drop in a new cam.
Author:  gmc [ Mon Aug 06, 2012 6:18 am ]
Post subject:  Re: cam or heads?
yeah thats kinda what i was leaning towards wat heads u guys recomend?
Author:  dabuckmaster24 [ Mon Aug 06, 2012 7:08 am ]
Post subject:  Re: cam or heads?
Send your heads to Cody at setx performance. He'll fix you up!!!

Sent from my C771 using Tapatalk
Author:  OwenDickeson [ Mon Aug 06, 2012 7:15 am ]
Post subject:  cam or heads?
Cody is backed up right now with head work and receiving large volumes of calls each day. Be patient and leave a voicemail if he doesn't answer. He is an awesome guy to do business with, and will flat out take care of you.

He diagnosed a cam problem of mine over the phone. A cam that he did not sell me, or have anything to do with. I can't say enough good things about the guy.
Author:  cb5331 [ Mon Aug 06, 2012 10:10 am ]
Post subject:  Re: cam or heads?
Author:  vertical_edge_800 [ Mon Aug 06, 2012 1:42 pm ]
Post subject:  Re: cam or heads?
Heads for sure..
Author:  MALLARDSX2 [ Mon Aug 06, 2012 6:30 pm ]
Post subject:  Re: cam or heads?
Head.....always go for head first..
Author:  bjg [ Tue Aug 07, 2012 7:53 am ]
Post subject:  Re: cam or heads?
Cam
Author:  Docott [ Tue Aug 07, 2012 8:01 am ]
Post subject:  Re: cam or heads?
Plugs.
Author:  Team Camo [ Tue Aug 07, 2012 6:46 pm ]
Post subject:  Re: cam or heads?
Calen also does good work. Not knocking Cody, but if he's backed up, he's backed up.
Author:  bjg [ Wed Aug 08, 2012 3:20 pm ]
Post subject:  Re: cam or heads?
Author:  Beadlejuicejr [ Wed Aug 08, 2012 5:33 pm ]
Post subject:  Re: cam or heads?
Heck just do both, save a lil longer if that's case.
Author:  Team Camo [ Wed Aug 08, 2012 8:17 pm ]
Post subject:  Re: cam or heads?
Author:  MaXXis85 [ Thu Aug 09, 2012 6:13 am ]
Post subject:  Re: cam or heads?
Author:  garrettpearce [ Thu Aug 09, 2012 9:00 am ]
Post subject:  Re: cam or heads?
I have just the cam in an otherwise stock motor and it runs 29 with 2 people and doesn't bogg down. Nearlly as bad
Author:  huntingsmith [ Thu Aug 09, 2012 9:20 am ]
Post subject:  Re: cam or heads?
Garrett what cam do u have installed? What where your speeds previously stock w same load
Author:  gmc [ Thu Aug 09, 2012 11:15 am ]
Post subject:  Re: cam or heads?
getting steady 28 with 2 ppl and had gas pouring out the overflow and bottom of air filter doesnt seem to correct
Author:  garrettpearce [ Thu Aug 09, 2012 11:40 am ]
Post subject:  Re: cam or heads?
Hoyt's cam speed isn't much faster but carries a load better. def want to put heads with that cam as soon As you can
Author:  bjg [ Fri Aug 10, 2012 6:40 pm ]
Post subject:  Re: cam or heads?
Page 1 of 1 All times are UTC - 6 hours
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/