MudmotorTalk.com http://mudmotortalk.com/mmt_v2/
Head Work http://mudmotortalk.com/mmt_v2/viewtopic.php?f=3&t=32260	Page 1 of 1

---

Author:	dcboy [ Mon Sep 10, 2012 7:40 pm ]
Post subject:	Head Work
Can anyone tell me how much they (setx,calen) are shaving the heads and spec on everthing else being combustion chamber, 3angle valve job, port and polish etc.

---

Author:	swampbilly [ Tue Sep 11, 2012 8:36 am ]
Post subject:	Re: Head Work
You may need to check with them. Setx does it according to other mods u have, so the heads will b different depending on the setup u have.

---

Author:	WestEndAngler [ Tue Sep 11, 2012 8:56 am ]
Post subject:	Re: Head Work
You want them to provide details on a performance service they offer so that you can duplicate their results? Hmmm.... Good luck getting an answer.

---

Author:	barnes_53 [ Tue Sep 11, 2012 9:08 am ]
Post subject:	Re: Head Work

---

Author:	270Handiman [ Tue Sep 11, 2012 9:17 am ]
Post subject:	Re: Head Work

---

Author:	WestEndAngler [ Tue Sep 11, 2012 10:55 am ]
Post subject:	Re: Head Work

---

Author:	barnes_53 [ Tue Sep 11, 2012 11:04 am ]
Post subject:	Re: Head Work
True...I can see that

---

Author:	dcboy [ Sun Sep 16, 2012 9:58 pm ]
Post subject:	Re: Head Work
I have a stock 35gtr I want to shave the heads down that's about it for now but eventually go with a cam & carb kit. I will get an exhaust once i shave the heads.

---

Author:	take'emgator [ Sun Sep 16, 2012 10:02 pm ]
Post subject:	Re: Head Work
Why would you do that, the carb and cam combo without exhaust is not really gonna perform at all. Why you want to shave the heads?

---

Author:	dcboy [ Mon Sep 17, 2012 11:23 am ]
Post subject:	Re: Head Work
I am putting an exhaust once I shave the heads and a 3 angle valve jobs with the larger ss valves, and tweak the factory carb. I will put the cam in once the crank case gasket starts leaking.

---

Page 1 of 1	All times are UTC - 6 hours
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/