| MudmotorTalk.com http://mudmotortalk.com/mmt_v2/ |
|
| mud buddy 45hp cam questions http://mudmotortalk.com/mmt_v2/viewtopic.php?f=3&t=32474 |
Page 1 of 1 |
| Author: | mudbuddyLT25hp [ Mon Sep 17, 2012 6:31 pm ] |
| Post subject: | mud buddy 45hp cam questions |
can some one tell me how the mudbuddy 45 mag holds up with lower gears and cams? |
|
| Author: | 270Handiman [ Mon Sep 17, 2012 6:44 pm ] |
| Post subject: | Re: mud buddy 45hp cam questions |
Do what? |
|
| Author: | mudbuddyLT25hp [ Mon Sep 17, 2012 7:07 pm ] |
| Post subject: | Re: mud buddy 45hp cam questions |
Is that ''do what" to the gears? cuz thats what i was thinking when the guy told me it had gears in it. im kinda new at this whole surface drive deal |
|
| Author: | schmitt [ Mon Sep 17, 2012 8:04 pm ] |
| Post subject: | Re: mud buddy 45hp cam questions |
Yeah u may have to explain that a bit better. They have a gear off the motor and a gear on the lower prop shaft that the belt goes around. The cam shaft is inside the motor. |
|
| Author: | Wildberry [ Mon Sep 17, 2012 8:08 pm ] |
| Post subject: | Re: mud buddy 45hp cam questions |
| Author: | schmitt [ Mon Sep 17, 2012 8:13 pm ] |
| Post subject: | Re: mud buddy 45hp cam questions |
| Author: | mudbuddyLT25hp [ Mon Sep 17, 2012 8:14 pm ] |
| Post subject: | Re: mud buddy 45hp cam questions |
ha i no the cam is in side the motor! but this guys boat im looking at he told me that it had low end gears. i just never have heard of that. |
|
| Author: | schmitt [ Mon Sep 17, 2012 8:20 pm ] |
| Post subject: | Re: mud buddy 45hp cam questions |
Well with the Mudbuddy u can change gears to your liking, If u want low end, top end or what not. Not hard to do |
|
| Author: | 270Handiman [ Mon Sep 17, 2012 10:14 pm ] |
| Post subject: | Re: mud buddy 45hp cam questions |
Ok, if it has a performance cam (not cams, only one in there), that is potentially a good thing. The gearing should be set to get the most performance possible with a particular load. If he's telling you it's geared low, I'm assuming he was carrying a big load with it or something. The bad news is that with a light load you want get any speed out of it, but as mentioned above, it's fairly east to swap the gears if needed. |
|
| Author: | Wildberry [ Tue Sep 18, 2012 5:38 am ] |
| Post subject: | Re: mud buddy 45hp cam questions |
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|