| MudmotorTalk.com http://mudmotortalk.com/mmt_v2/ |
|
| GTR reverse Handel http://mudmotortalk.com/mmt_v2/viewtopic.php?f=3&t=32490 |
Page 1 of 1 |
| Author: | Fletch [ Tue Sep 18, 2012 2:12 pm ] |
| Post subject: | GTR reverse Handel |
Very hard to squeeze. Dumped fluid out and put new in. If it had air in it it would be like a sponge right. Only has 8hrs on motor but has always been this hard. |
|
| Author: | WestEndAngler [ Tue Sep 18, 2012 2:14 pm ] |
| Post subject: | Re: GTR reverse Handel |
Do you have the new style or old? If old style... try putting some WD40 on the lever or loosening the bolts that hold the lever & reservoir to the tiller arm. |
|
| Author: | deltaduckmaster [ Tue Sep 18, 2012 2:18 pm ] |
| Post subject: | Re: GTR reverse Handel |
| Author: | elebouef102 [ Tue Sep 18, 2012 2:55 pm ] |
| Post subject: | Re: GTR reverse Handel |
| Author: | marsh chicken [ Tue Sep 18, 2012 3:32 pm ] |
| Post subject: | Re: GTR reverse Handel |
I had the same issue..spray some PB blaster in the handle pivot point. It might have rusted up on ha a bit |
|
| Author: | dgalmo [ Tue Sep 18, 2012 9:18 pm ] |
| Post subject: | Re: GTR reverse Handel |
mine was hard to squeeze brand new, took two hands to put it in the locked position. Now with 75 hours, its a lot looser. |
|
| Author: | Fletch [ Wed Sep 19, 2012 6:53 am ] |
| Post subject: | Re: GTR reverse Handel |
Westend its the new. Thanks for the replies. DDM your right I don't have to squeeze far at all to engage. Just making sure its doing like its supposed to. |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|