| MudmotorTalk.com http://mudmotortalk.com/mmt_v2/ |
|
| PRODRIVE mods. Need suggestions http://mudmotortalk.com/mmt_v2/viewtopic.php?f=3&t=33211 |
Page 1 of 1 |
| Author: | Missourimudrunner [ Sat Oct 13, 2012 8:34 am ] |
| Post subject: | PRODRIVE mods. Need suggestions |
Ok I have a double barrel marshmellow on my 06 36 HP PRODRIVE. I'm sure it's non cdi. I'm going to go with the mikuni single first then prolly go to the iron mountain heads next. This is most likely all I will do but I need opinions before I spend 1300 bucks. Will I gain power and would these be good upgrades be probally the best upgrades if this is all I am going to do? Thanks |
|
| Author: | oncall [ Sat Oct 13, 2012 9:47 am ] |
| Post subject: | Re: PRODRIVE mods. Need suggestions |
Do a search for custom head work. Plenty of threads on that. They are well worth the investment. |
|
| Author: | Missourimudrunner [ Sat Oct 13, 2012 12:14 pm ] |
| Post subject: | Re: PRODRIVE mods. Need suggestions |
Where can I get head work done around St. Louis area though. I know that my best bang for my buck but finding someone to do it is another story |
|
| Author: | tchauvin [ Sat Oct 13, 2012 12:23 pm ] |
| Post subject: | Re: PRODRIVE mods. Need suggestions |
| Author: | craig [ Sat Oct 13, 2012 12:32 pm ] |
| Post subject: | Re: PRODRIVE mods. Need suggestions |
Calen also sells heads to the do-it-yourself-ers. |
|
| Author: | Beadlejuicejr [ Sat Oct 13, 2012 12:40 pm ] |
| Post subject: | Re: PRODRIVE mods. Need suggestions |
Give Calen a shout he's a real good guy and will set you up right. |
|
| Author: | Beadlejuicejr [ Sat Oct 13, 2012 12:41 pm ] |
| Post subject: | Re: PRODRIVE mods. Need suggestions |
Don't go with iron mountain heads. |
|
| Author: | tchauvin [ Sat Oct 13, 2012 12:53 pm ] |
| Post subject: | Re: PRODRIVE mods. Need suggestions |
yup,,forgot bout calens... |
|
| Author: | Missourimudrunner [ Sat Oct 13, 2012 1:20 pm ] |
| Post subject: | Re: PRODRIVE mods. Need suggestions |
Ok I can do heads. Now would a mikuni carb and setx heads... Would I see a change in performance overall? |
|
| Author: | Skipr [ Sat Oct 13, 2012 1:31 pm ] |
| Post subject: | Re: PRODRIVE mods. Need suggestions |
Yes, you should see a significant difference. |
|
| Author: | oncall [ Sat Oct 13, 2012 3:24 pm ] |
| Post subject: | Re: PRODRIVE mods. Need suggestions |
| Author: | Missourimudrunner [ Sat Oct 13, 2012 8:50 pm ] |
| Post subject: | Re: PRODRIVE mods. Need suggestions |
That's what I'm looking for mainly is load carrying without changing the cam |
|
| Author: | jerimiahw [ Sat Oct 13, 2012 9:29 pm ] |
| Post subject: | Re: PRODRIVE mods. Need suggestions |
i can get ur heads shaved and ported alot cheaper if ur willing to ship also can install stainless valves to if ur willing to ship they will not be sanded or grinded they will be cut in cnc to what ever u choose 20 30 40 50 thousands ur choice |
|
| Author: | banded-mallard [ Mon Oct 15, 2012 5:34 am ] |
| Post subject: | Re: PRODRIVE mods. Need suggestions |
| Author: | Missourimudrunner [ Mon Oct 15, 2012 10:54 am ] |
| Post subject: | Re: PRODRIVE mods. Need suggestions |
Ok guys here is my plan. I have to do the mikuni first cause my carb was all kinds of messed up from being damaged during shipping. The my idle adjustments were snapped off and the two twist knows on the top of carb are broken off. So I'm going to do mikuni first run it a bit then. Most likely work on tearing the heads off. With duck season comeing up a really don't want to be out of motor for very long so prolly late decmeber Setx will be getting a call |
|
| Author: | Will [ Mon Oct 15, 2012 11:59 am ] |
| Post subject: | Re: PRODRIVE mods. Need suggestions |
Pay the core and you'll only be down for a couple hours to do the swap.... |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|