I have a 1848 with 1/8 sides and 3/16 bottom. Wide open floor. I have a 35 hp sport. I'm running 29 with just me or a fully loaded boat. I have cam heads and exhaust. What would be the next best mod to get? Just really hoping to see over 30mph.

From what I've seen on here a prop could possibly get you an extra 3-5 mph.

Get a carb and you'll be in the 33-34 range.

X2 on carb.

Yea get a carb. You will be real happy with that set up.

Mudslut
Did I see you on the Bend last year tryin to shoot a Can to mount?

What rpms is 29 mph

Bdubya wasn't me but there's plenty out there if I wanted to mount one.

On the other site he says he runs the same with 4 people as he does empty. He has no responded as to the Rpms of either. From what I gathered on tos he needs to look into a diffrent prop

Get a carb

Why?

Bc he don't have one and he asked what's a good upgrade. Why not

So his carb is the problem? Cause I think he said he runs 4 people the same speed.

Didn't say that. Did I? He asked what a good upgrade did u miss that part? Or u so worried about what goes on over at tos? I haven't made it over there to read this post

So longer rods and flat top pistons?

Sorry I haven't responded I haven't been here in a while. Took my boat out this past weekend and still seeing 29 mph solo. Took 3 buddies with me for a total of 4 people in the boat and running 28 bumping 29. From what I've read and seen on here usually people are running a few more mph faster running solo. Just seeing if you guys had any ideas. Also the rpms are right around 4400

Also my prop is a new big blade

If u put a carb kit u wont kill reliability and you'll gain a good bit from it

$800 for 300-400 rpm.

He said smileys are for queers.

is your motor a cdi? who makes your cam? am i the only one who thinks if you are running the same rpms with a load as you are empty there is other things than a 800 dollar carb? maybe trade your cam for a cam with a little more duration?

Yes its a cdi. And the cam is a pvt

Do you have 4700 coils?

Did you jet the stock carb? Change governor springs? Do anything to the stock carb at all? Is the tuneup right for the heads and cam?

Yes I have 4700 coils. The guy that did my work said he reworked the stock carb for better flow.

Get rid of governor and stock carb setup u will be alot happier


Sent from my iPhone using

Will the mikuni do away with the governor?

Four dudes in a mud boat going 29mph?

Call 'er good and put the money your going to waste to go 2 mph more in your retirement account.

He did jet the carb but he also said he grinded something down where instead of a 90 it was more of a 45. When it comes to carburetors I'm lost

It'll do away with the governor but still won't turn over 4750 bcause of coils.