| MudmotorTalk.com http://mudmotortalk.com/mmt_v2/ |
|
| Pd 32 w/ stage 1 http://mudmotortalk.com/mmt_v2/viewtopic.php?f=3&t=6389 |
Page 1 of 1 |
| Author: | GaugeTheDuckDog [ Sun Dec 06, 2009 2:01 pm ] |
| Post subject: | Pd 32 w/ stage 1 |
I have a mikune carb. and evt intake, heads done, timing key I am having some trouble when I hit the gas once I am on step the mid range and top end its good. I am running a 165 main and 22.5 pilot. I have adjusted the accelerator pump and air mixture screw to were it seems to run the best. What can I do to help my problem. Thanks to a buddy we have the motor running this good if not for him it would run really crappy. I have a stock prop with extra pitch and med/ heavy cup seems to be to much for my motor. If anyone has a 12x13 or 12x14 hopkins that they want to sell please let me know.My prop just need more motor. Thanks-Josh |
|
| Author: | deadbird8 [ Sun Dec 06, 2009 4:40 pm ] |
| Post subject: | Re: Pd 32 w/ stage 1 |
| Author: | GaugeTheDuckDog [ Sun Dec 06, 2009 11:01 pm ] |
| Post subject: | Re: Pd 32 w/ stage 1 |
When I engage the clutch and start to give it gas it is trying to stall unless I let off and roll the gas but it still spits and sputers. If I hit the gas real hard and hold it it will turn off. When I get going it seems ok |
|
| Author: | shallow water master [ Sun Dec 06, 2009 11:06 pm ] |
| Post subject: | Re: Pd 32 w/ stage 1 |
| Author: | stumpgrinder [ Mon Dec 07, 2009 6:26 am ] |
| Post subject: | Re: Pd 32 w/ stage 1 |
| Author: | Brinkleydog [ Wed Dec 09, 2009 1:04 pm ] |
| Post subject: | Re: Pd 32 w/ stage 1 |
X2 alway did it with my stage 1. I have a 12X14 hopkins if u still need one let me know. I also have a worn out 12x14 that ill give with it. later |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|