It is currently Thu Mar 28, 2024 3:54 pm




Reply to topic  [ 18 posts ] 
 Wiring killswitch predator 670 
Author Message
MMT 1000 Club
User avatar

Joined: Wed Jul 01, 2015 6:06 pm
Posts: 1447
Location: South central, ks
Post Wiring killswitch predator 670
So here I am wanting to get my killswitch on before I go hunting. I'm curious which wires are my "spark wires" and how to hook them up to the kill switch. Any help would be appreciated.

I believe that thing with the cooling fins on it is my ignition module/coil

It's simple. get a mud motor. shoot ducks in the face.


Sat Nov 07, 2015 12:36 pm
Profile
MMT 1000 Club
User avatar

Joined: Wed Jul 01, 2015 6:06 pm
Posts: 1447
Location: South central, ks
Post Re: Wiring killswitch predator 670
I looked in my book and sadly there's no wiring diagram

The yellow wire is the low oil sensor. If I put the switch on that, will that kill it?
It's simple. get a mud motor. shoot ducks in the face.


Sat Nov 07, 2015 12:38 pm
Profile
MMT 1000 Club

Joined: Sun Sep 01, 2013 2:53 pm
Posts: 3480
Location: Hardin County, Tx
Post Re: Wiring killswitch predator 670
I'd just set it up to break the 12v supply to your key switch. Probably the easiest way to go about it without a wiring diagram. That way if the switch is yanked, it'll be just like turning the key off.

_________________
#CFFITR

-Custom pool noodle
-stage 4 water wings


Sat Nov 07, 2015 12:40 pm
Profile
MMT 1000 Club
User avatar

Joined: Wed Jul 01, 2015 6:06 pm
Posts: 1447
Location: South central, ks
Post Re: Wiring killswitch predator 670
Okay. I'll try to finger this out

It's simple. get a mud motor. shoot ducks in the face.


Sat Nov 07, 2015 12:41 pm
Profile
MMT 1000 Club

Joined: Sun Dec 14, 2014 2:21 pm
Posts: 3214
Post Re: Wiring killswitch predator 670
Ahhh who needs a kill switch anyways


Sent from my iPhone using Tapatalk


Sun Nov 08, 2015 7:27 am
Profile
MMT 1000 Club
User avatar

Joined: Wed Feb 04, 2009 7:50 pm
Posts: 3833
Location: Old East Dallas, Texas
Post Re: Wiring killswitch predator 670

_________________
Excel 1851F4 w/ MB35HD+R CDI with a little bit of this and little bit of that


Sun Nov 08, 2015 9:11 pm
Profile
MMT 1000 Club
User avatar

Joined: Wed Feb 04, 2009 7:50 pm
Posts: 3833
Location: Old East Dallas, Texas
Post Re: Wiring killswitch predator 670

_________________
Excel 1851F4 w/ MB35HD+R CDI with a little bit of this and little bit of that


Sun Nov 08, 2015 9:17 pm
Profile
MMT 1000 Club
User avatar

Joined: Wed Jul 01, 2015 6:06 pm
Posts: 1447
Location: South central, ks
Post Re: Wiring killswitch predator 670
Good to know!!!

It's simple. get a mud motor. shoot ducks in the face.


Sun Nov 08, 2015 10:20 pm
Profile
MMT 1000 Club
User avatar

Joined: Wed Jul 01, 2015 6:06 pm
Posts: 1447
Location: South central, ks
Post Re: Wiring killswitch predator 670
I appreciate your help

It's simple. get a mud motor. shoot ducks in the face.


Sun Nov 08, 2015 10:21 pm
Profile
MMT 1000 Club
User avatar

Joined: Sun Jun 16, 2013 4:43 pm
Posts: 1381
Location: Avoyelles Parish/ Marksville LA
Post Re: Wiring killswitch predator 670
Tie a string to the key and that string to you. Easy lol


Sent from my iPhone using Tapatalk


Sun Nov 08, 2015 11:31 pm
Profile
MMT Elite Member
User avatar

Joined: Wed Jan 14, 2009 7:23 am
Posts: 6233
Location: Tarkington, TX
Post Re: Wiring killswitch predator 670
Always install your kill switch inline with the kill wired that ground your coils from the key switch. Or also inline with the Low oil sensor like DB8 said. That will instantly stop fire.

_________________
Bayou Surface Drive
337-351-0362
Tarkington, TX 77327


Mon Nov 09, 2015 9:59 am
Profile
MMT 1000 Club
User avatar

Joined: Wed Jul 01, 2015 6:06 pm
Posts: 1447
Location: South central, ks
Post Re: Wiring killswitch predator 670
I tried the low oil sensor. When I disconnected it the engine kept running

It's simple. get a mud motor. shoot ducks in the face.


Mon Nov 09, 2015 10:02 am
Profile
MMT Elite Member
User avatar

Joined: Wed Jan 14, 2009 7:23 am
Posts: 6233
Location: Tarkington, TX
Post Re: Wiring killswitch predator 670
For some reason I cannot see the pics, But you need to tap into the kill wire from the coils. It will run back to your key switch so find it and install kill switch there.

_________________
Bayou Surface Drive
337-351-0362
Tarkington, TX 77327


Mon Nov 09, 2015 10:20 am
Profile
MMT 1000 Club
User avatar

Joined: Wed Jul 01, 2015 6:06 pm
Posts: 1447
Location: South central, ks
Post Re: Wiring killswitch predator 670
Alright. Thank you

It's simple. get a mud motor. shoot ducks in the face.


Mon Nov 09, 2015 10:47 am
Profile
MMT Elite Member
User avatar

Joined: Wed Jan 14, 2009 7:23 am
Posts: 6233
Location: Tarkington, TX
Post Re: Wiring killswitch predator 670
For the kill switch typically any two across from each other are the ones you want to connect. You can test with a meter to verify. Set to continuity and test the leads and you should see Open loop then when you pull the kill switch you should see something reading resistance. (completes to ground). Looking at your pic I would follow the small gauge black wire to see if it goes to the coils, and that will be your tie in wire if so.

_________________
Bayou Surface Drive
337-351-0362
Tarkington, TX 77327


Mon Nov 09, 2015 11:37 am
Profile
MMT 1000 Club
User avatar

Joined: Wed Jul 01, 2015 6:06 pm
Posts: 1447
Location: South central, ks
Post Re: Wiring killswitch predator 670
Little update: I took my handy test light and went to wire searching. On the back of the ignition switch, the white wire is constant 12v, the yellow wire is on when you turn the key on and off when you turn it off. I tested both wires by starting the engine and disconnecting them. The yellow wire had a more "instant kill" so that is the one I used for the kill switch. If any ody wants pictures I can go take some later. I got kind of excited when I finally got it installed and working and forgot about the pictures. If you look at the first picture of the thread, the yellow wire I'm talking about is the one in that picture with the blue butt connector.

It's simple. get a mud motor. shoot ducks in the face.


Sat Dec 12, 2015 9:49 am
Profile
MMT Pro Member

Joined: Sun Aug 27, 2017 6:24 am
Posts: 53
Post Re: Wiring killswitch predator 670

_________________
Extreme Metal Fab 16x48 w/huntdeck
40EFI Backwater LT


Sat Sep 08, 2018 5:34 pm
Profile
MMT 1000 Club

Joined: Mon Dec 31, 2012 11:07 pm
Posts: 4820
Location: West Monroe, LA
Post Re: Wiring killswitch predator 670
He hasn't been around in a while. Probably not gonna be much help to you.

#CFFITR
#TheGhostBoat
#whoneedsphysicsihaveamudmotor


Sat Sep 08, 2018 8:35 pm
Profile
Display posts from previous:  Sort by  
Reply to topic   [ 18 posts ] 

Who is online

Users browsing this forum: No registered users and 214 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: