| MudmotorTalk.com http://mudmotortalk.com/mmt_v2/ |
|
| Performance update after mods http://mudmotortalk.com/mmt_v2/viewtopic.php?f=3&t=66038 |
Page 1 of 1 |
| Author: | ibfishin [ Mon Feb 29, 2016 8:31 am ] |
| Post subject: | Performance update after mods |
-3 blade GTR prop. -Alumitech 18 foot hull stepped chine which is 48 inch at bottom and 60 inch at the step. -9 gallons of gas -35 GTR with mikuni, delta heads, mm exhaust Ran it with me and the dog and got 30.5 in shallow water. Ran it with me, wife, dog, full yeti soft side 30 and got 29.4 in shallow water. 3970rpms seems to be the sweet spot. Any higher and the prop is too high and I lose speed. Still have some tuning to do, but need to really read up on the manual first. - exhaust backfires and shoots blue flames if I rev it up out of gear and let off throttle. - when I put it in gear and hammer the throttle it pops through the carb/filter. I have to ease into the throttle then stab it to avoid carb backfire. - when running I see an occasional drip of gas out of the overflow tube. The discoloration of the frame, where fuel has been running down, clued me in to look for it. Then of course other things have decided to rear their head. - Brake/hydraulic smelling fluid is leaking from somewhere near the caliper. - Trim is slow and makes noise. I then noticed fluid is leaking from the trim housing. Sent from my SM-G920V using Tapatalk |
|
| Author: | jc [ Mon Feb 29, 2016 6:41 pm ] |
| Post subject: | Re: Performance update after mods |
Don't you just love a mud motor, always something to keep you busy. Those are good speeds. Sounds like you just need to adjust your float height a little to stop the drip and just do a little fine tuning. Deadbird had some pretty good pictures in another post showing how to adjust the accelerator pump. |
|
| Author: | ibfishin [ Mon Feb 29, 2016 7:05 pm ] |
| Post subject: | Re: Performance update after mods |
Yeah I'm trying to locate that thread and triple read the Mikuni tuning manual. Not sure what what to do about my trim and reverse fluid leaking issues. Sent from my SM-G920V using Tapatalk |
|
| Author: | jc [ Mon Feb 29, 2016 8:55 pm ] |
| Post subject: | Re: Performance update after mods |
Here is the post I saw. |
|
| Author: | krazo [ Mon Feb 29, 2016 10:52 pm ] |
| Post subject: | Re: Performance update after mods |
You got the old square trim or the new trim? Sent from my iPad using Tapatalk |
|
| Author: | ibfishin [ Tue Mar 01, 2016 6:28 am ] |
| Post subject: | Re: Performance update after mods |
The trim unit looks like a small rectangular box.1451263427613.jpg Sent from my SM-G920V using Tapatalk |
|
| Author: | ibfishin [ Tue Mar 01, 2016 6:38 am ] |
| Post subject: | Re: Performance update after mods |
Thanks JC.... I took some screen shots to print off and add to my mudmotor repair manual. Sent from my SM-G920V using Tapatalk |
|
| Author: | MaXXis85 [ Tue Mar 01, 2016 6:45 am ] |
| Post subject: | Re: Performance update after mods |
That is a CMC jackplate unit that GT originally used. It can be rebuilt |
|
| Author: | ibfishin [ Tue Mar 01, 2016 9:36 am ] |
| Post subject: | Re: Performance update after mods |
Sweet... Is it something that the mechanically inclined can do or does it need to go to CMC? Sent from my SM-G920V using Tapatalk |
|
| Author: | MaXXis85 [ Tue Mar 01, 2016 11:07 am ] |
| Post subject: | Re: Performance update after mods |
| Author: | Will [ Tue Mar 01, 2016 11:51 am ] |
| Post subject: | Re: Performance update after mods |
viewtopic.php?f=41&t=52696 |
|
| Author: | ibfishin [ Tue Mar 01, 2016 12:09 pm ] |
| Post subject: | Re: Performance update after mods |
Thanks Will. Sent from my SM-G920V using Tapatalk |
|
| Author: | krazo [ Tue Mar 01, 2016 12:11 pm ] |
| Post subject: | Re: Performance update after mods |
Thanks Will I was gonna post the link if he said it was the old trim. Mine has been rebuilt for almost a year with no problems yet(knock on wood). One thing I remember was that the biggest oring was really hard to get off and on. And use a non detergent 30 weight oil to refill. Take it slow taking it apart and lay everything out so you can remember where it goes. Lay off the beer till you get done or it will probably leak.[FACE WITH STUCK-OUT TONGUE AND WINKING EYE] Sent from my iPhone using Tapatalk |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|