You better hope it doesn't stop half way while you are out in the marsh!!You will just be going in circles
| MudmotorTalk.com http://mudmotortalk.com/mmt_v2/ |
|
| Hydraulic FPR PD http://mudmotortalk.com/mmt_v2/viewtopic.php?f=3&t=6854 |
Page 1 of 1 |
| Author: | SP [ Fri Jan 01, 2010 9:09 am ] |
| Post subject: | Hydraulic FPR PD |
I am noticing that my Hydraulic reverse is sticking at times. Doesn't seem to have the same torque to turn the lower unit. Some times it works like a champ and other times I hear the hydraulic pump working, but it is not turning the lower unit. I will trim the motor up and then it seems to work fine. Other times it just turns as normal? Any thoughts? Thx for the input. I have a feeling eventually I am going to have this thing in reverse and not able to swing it back around! |
|
| Author: | JIMMY W [ Fri Jan 01, 2010 9:48 am ] |
| Post subject: | Re: Hydraulic FPR PD |
You better hope it doesn't stop half way while you are out in the marsh!!You will just be going in circles
|
|
| Author: | SP [ Fri Jan 01, 2010 9:52 am ] |
| Post subject: | Re: Hydraulic FPR PD |
| Author: | The Shafer [ Fri Jan 01, 2010 9:57 am ] |
| Post subject: | Re: Hydraulic FPR PD |
| Author: | deltaduckmaster [ Fri Jan 01, 2010 11:03 am ] |
| Post subject: | Re: Hydraulic FPR PD |
It could be one of the 60 hydrolic lines pinched !!LOL
|
|
| Author: | POKER1 [ Fri Jan 01, 2010 2:11 pm ] |
| Post subject: | Re: Hydraulic FPR PD |
Maybe some air in the lines. 
|
|
| Author: | OwenDickeson [ Fri Jan 01, 2010 3:47 pm ] |
| Post subject: | Re: Hydraulic FPR PD |
| Author: | JIMMY W [ Fri Jan 01, 2010 4:32 pm ] |
| Post subject: | Re: Hydraulic FPR PD |
| Author: | craig [ Fri Jan 01, 2010 4:34 pm ] |
| Post subject: | Re: Hydraulic FPR PD |
| Author: | phowler [ Sat Jan 02, 2010 7:30 am ] |
| Post subject: | Re: Hydraulic FPR PD |
| Author: | craig [ Sat Jan 02, 2010 5:59 pm ] |
| Post subject: | Re: Hydraulic FPR PD |
| Author: | OwenDickeson [ Sat Jan 02, 2010 8:16 pm ] |
| Post subject: | Re: Hydraulic FPR PD |
| Author: | The Shafer [ Sat Jan 02, 2010 8:27 pm ] |
| Post subject: | Re: Hydraulic FPR PD |
|
|
|
| Author: | SP [ Sun Jan 03, 2010 8:30 am ] |
| Post subject: | Re: Hydraulic FPR PD |
Very helpful guys! The best advice-- call KP. Sprayed it down with some lithium grease. Will see if this loosens things up today. If not, I am guessing it is the hydraulic lines.
|
|
| Author: | BROOKS [ Mon Jan 04, 2010 3:10 pm ] |
| Post subject: | Re: Hydraulic FPR PD |
I gots to put mines hands on one just this past week-end ... very nice invention Pro-Drive came out with !!! My guess is gonna be air in the lines and I'm shore thay have a way of bleedin' that off. Did you git a manual with the purchace? |
|
| Author: | POKER1 [ Mon Jan 04, 2010 4:12 pm ] |
| Post subject: | Re: Hydraulic FPR PD |
| Author: | SP [ Mon Jan 04, 2010 5:08 pm ] |
| Post subject: | Re: Hydraulic FPR PD |
| Author: | JIMMY W [ Mon Jan 04, 2010 5:20 pm ] |
| Post subject: | Re: Hydraulic FPR PD |
| Author: | POKER1 [ Mon Jan 04, 2010 5:24 pm ] |
| Post subject: | Re: Hydraulic FPR PD |
I tie it to my wrist on a long rope so that don't happen. Sometimes you just got to be smarter than the magnet.
|
|
| Author: | JIMMY W [ Mon Jan 04, 2010 6:08 pm ] |
| Post subject: | Re: Hydraulic FPR PD |
| Author: | POKER1 [ Mon Jan 04, 2010 6:22 pm ] |
| Post subject: | Re: Hydraulic FPR PD |
Damn, I didnt know we was competing. 
|
|
| Author: | Mudhole [ Tue Jan 05, 2010 8:52 am ] |
| Post subject: | Re: Hydraulic FPR PD |
Poker needs a BIGGER magnet most times cause he still aint found his brush knife!!!
|
|
| Author: | POKER1 [ Tue Jan 05, 2010 10:12 am ] |
| Post subject: | Re: Hydraulic FPR PD |
| Author: | BROOKS [ Wed Jan 06, 2010 3:34 pm ] |
| Post subject: | Re: Hydraulic FPR PD |
| Author: | SP [ Wed Jan 06, 2010 6:52 pm ] |
| Post subject: | Re: Hydraulic FPR PD |
| Author: | deltaduckmaster [ Wed Jan 06, 2010 6:59 pm ] |
| Post subject: | Re: Hydraulic FPR PD |
| Author: | dead animal [ Wed Jan 06, 2010 7:14 pm ] |
| Post subject: | Re: Hydraulic FPR PD |
nevermind. |
|
| Author: | OwenDickeson [ Wed Jan 06, 2010 9:04 pm ] |
| Post subject: | Re: Hydraulic FPR PD |
| Author: | BROOKS [ Thu Jan 07, 2010 10:35 am ] |
| Post subject: | Re: Hydraulic FPR PD |
| Author: | hotdognjo [ Thu Jan 07, 2010 11:27 am ] |
| Post subject: | Re: Hydraulic FPR PD |
Mr. Brooks, Would you have some change for dis chump? I am trying to get the manual pin puller, but if racheting with the steering wheel won't work, den hydro it must be:( Thanks, the dog |
|
| Author: | SP [ Thu Jan 07, 2010 12:11 pm ] |
| Post subject: | Re: Hydraulic FPR PD |
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|