MudmotorTalk.com
http://mudmotortalk.com/mmt_v2/

Shout out to Delta Performance
http://mudmotortalk.com/mmt_v2/viewtopic.php?f=3&t=68573		 Page 1 of 1
Author:  CycloneShaun [ Fri Oct 07, 2016 10:59 pm ]
Post subject:  Shout out to Delta Performance
Got my boat back and couldn't be happier. Even on the stock prop bouncing the rev limiter it's got so much more power. Can't wait to get the worked prop on there to see what it can really do. :mrgreen:
Author:  Gros'bec [ Sat Oct 08, 2016 1:45 am ]
Post subject:  Re: Shout out to Delta Performance
What all did you have done to it?
Author:  CycloneShaun [ Sat Oct 08, 2016 6:10 am ]
Post subject:  Re: Shout out to Delta Performance
Stage 3. Exhaust, cam, heads, tuning, etc. Huge difference from stock.
Author:  Gros'bec [ Sat Oct 08, 2016 10:54 am ]
Post subject:  Re: Shout out to Delta Performance
Yeah it puts a smile on your face when you ain't running like turtle anymore. The cam will really help with the load carrying.
Author:  JphIII [ Sat Oct 08, 2016 4:45 pm ]
Post subject:  Re: Shout out to Delta Performance
Any chance you could post a video? Also let us know what you end up getting done to the prop. Who you gonna go with? Apparently PD is coming out with bigger gen IV prop this month that may be awesome to have worked for your case. Voodoo or stainless works?
Author:  SCmudder7071 [ Sat Oct 08, 2016 5:26 pm ]
Post subject:  Re: Shout out to Delta Performance
Author:  CycloneShaun [ Sat Oct 08, 2016 5:36 pm ]
Post subject:  Re: Shout out to Delta Performance
Author:  CycloneShaun [ Sat Oct 08, 2016 5:38 pm ]
Post subject:  Re: Shout out to Delta Performance
Author:  CycloneShaun [ Sat Oct 08, 2016 5:40 pm ]
Post subject:  Re: Shout out to Delta Performance
Author:  Gros'bec [ Sat Oct 08, 2016 8:07 pm ]
Post subject:  Re: Shout out to Delta Performance
Everybody has there little difference.
To me a stage 1 was heads,carb, exhaust
Stage 2 was cam and connecting rods added to that.
Stage 3 would be adding Pistons and roller rockers.
Author:  cb5331 [ Sat Oct 08, 2016 8:15 pm ]
Post subject:  Re: Shout out to Delta Performance
Whut
Author:  CycloneShaun [ Sat Oct 08, 2016 8:16 pm ]
Post subject:  Re: Shout out to Delta Performance
Then mine would be stage 2 cuz they didn't mess with my pistons.
Author:  TPerkins [ Sat Oct 08, 2016 8:18 pm ]
Post subject:  Re: Shout out to Delta Performance
Delta categorizes their levels different than the traditional stages. A level three is a stage two.

Sent from my SM-G920V using Tapatalk
Author:  CycloneShaun [ Sat Oct 08, 2016 9:04 pm ]
Post subject:  Re: Shout out to Delta Performance
I could have sworn the dyno sheet said something 3. Guess apparently it was level 3.

I just wanted something more reliable (I've had problems with the stock valves and exhaust) and more load carrying power. Idk how it's gonna hold up over time, but for now it for sure pulls a load like a completely different boat even with a stock prop.
Author:  TPerkins [ Sat Oct 08, 2016 9:06 pm ]
Post subject:  Re: Shout out to Delta Performance
Their level 3 is a solid setup. I've been very happy with mine.

Sent from my SM-G920V using Tapatalk
Author:  CycloneShaun [ Sat Oct 08, 2016 9:11 pm ]
Post subject:  Re: Shout out to Delta Performance
Yea. The voodoo is a little loud, but tolerable for me. Other people were telling me they could hear me about 3 canals over when I was wide open lol.

Only problem I have like I said is I'm hitting the rev limiter on that stock prop and u can tell it's not worked right for the best hole shot. Matter of fact when I ran solo I had to trim the blade almost all the way into the water to keep it off the limiter. I was really impressed with the power in some nasty stuff too.
Author:  Matt Boyt [ Sat Oct 08, 2016 9:48 pm ]
Post subject:  Re: Shout out to Delta Performance
Top notch dudes I just got my level 4 carb and it's a freakin monster


Sent from my iPhone using Tapatalk
Page 1 of 1 All times are UTC - 6 hours
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/