Tore down the motor my buddy got only to find this...Sheered off. Check out the metal shavings in the bottom.
How the hell does this even happen? Vanguard 35hp.
| MudmotorTalk.com http://mudmotortalk.com/mmt_v2/ |
|
| Ever see this before? Vanguard 35 http://mudmotortalk.com/mmt_v2/viewtopic.php?f=3&t=68806 |
Page 1 of 1 |
| Author: | marada [ Tue Nov 01, 2016 3:22 pm ] |
| Post subject: | Ever see this before? Vanguard 35 |
Tore down the motor my buddy got only to find this...Sheered off. Check out the metal shavings in the bottom. How the hell does this even happen? Vanguard 35hp. |
|
| Author: | cb5331 [ Tue Nov 01, 2016 3:36 pm ] |
| Post subject: | Re: Ever see this before? Vanguard 35 |
| Author: | dead animal [ Tue Nov 01, 2016 3:36 pm ] |
| Post subject: | Re: Ever see this before? Vanguard 35 |
that won't buff right out!!!!!! |
|
| Author: | marada [ Tue Nov 01, 2016 3:38 pm ] |
| Post subject: | Re: Ever see this before? Vanguard 35 |
| Author: | iah2ofwlr [ Tue Nov 01, 2016 7:28 pm ] |
| Post subject: | Re: Ever see this before? Vanguard 35 |
Mine broke the crank this year too. But it broke in the back at the journal. Had 235 hours on a 2011 55mag. |
|
| Author: | Will C [ Tue Nov 01, 2016 7:38 pm ] |
| Post subject: | Re: Ever see this before? Vanguard 35 |
Hopefully your buddy got it for free |
|
| Author: | OmniCamaro [ Tue Nov 01, 2016 7:54 pm ] |
| Post subject: | Re: Ever see this before? Vanguard 35 |
I'd contact the company and at least let them know what's up. Sent from my iPad using Tapatalk |
|
| Author: | cb5331 [ Tue Nov 01, 2016 7:55 pm ] |
| Post subject: | Re: Ever see this before? Vanguard 35 |
| Author: | marada [ Tue Nov 01, 2016 9:08 pm ] |
| Post subject: | Re: Ever see this before? Vanguard 35 |
| Author: | Russ [ Tue Nov 01, 2016 9:38 pm ] |
| Post subject: | Re: Ever see this before? Vanguard 35 |
| Author: | Smoke [ Wed Nov 02, 2016 10:25 am ] |
| Post subject: | Re: Ever see this before? Vanguard 35 |
| Author: | OmniCamaro [ Wed Nov 02, 2016 1:48 pm ] |
| Post subject: | Re: Ever see this before? Vanguard 35 |
| Author: | marada [ Wed Nov 02, 2016 2:49 pm ] |
| Post subject: | Re: Ever see this before? Vanguard 35 |
| Author: | mizzippi jb [ Wed Nov 02, 2016 4:40 pm ] |
| Post subject: | Re: Ever see this before? Vanguard 35 |
If it had a rev limiter, it would either have a yellow "chip" looking deal with 4750 or 5100 stamped on it, or a newer limiter will have a decal. |
|
| Author: | jc [ Wed Nov 02, 2016 6:52 pm ] |
| Post subject: | Re: Ever see this before? Vanguard 35 |
Damn, the crank broke. Maybe the block is still good but I would look at it close for cracks. |
|
| Author: | iah2ofwlr [ Wed Nov 02, 2016 8:10 pm ] |
| Post subject: | Re: Ever see this before? Vanguard 35 |
Yeah. If it was a 7000 pry had to much compression. Pry had 200+. That's what mine had when she went. Got a new block crank rods and Pistons upgraded to CDI with 4700 coils and she's runnin hard again now. Less compression now too. Bout 185-190. Don't have decked heads anymore but it has bps rods and Pistons still. |
|
| Author: | Russ [ Wed Nov 02, 2016 8:53 pm ] |
| Post subject: | Re: Ever see this before? Vanguard 35 |
7000 had around 240 with that year model. Closer to 220 or so with some of the later models, I believe. |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|