| MudmotorTalk.com http://mudmotortalk.com/mmt_v2/ |
|
| prodrive momentary switch question http://mudmotortalk.com/mmt_v2/viewtopic.php?f=3&t=70357 |
Page 1 of 1 |
| Author: | sledhead26 [ Tue May 02, 2017 4:48 pm ] |
| Post subject: | prodrive momentary switch question |
I went to change the momentary button today and there is what looks like a small resistor connected to one side of the button. The other end wasn't connected to anything. Is this necessary? Any help would be appreciated. Going to try and attach a picture. not sure if it will work. |
|
| Author: | cj [ Tue May 02, 2017 8:35 pm ] |
| Post subject: | Re: prodrive momentary switch question |
Sounds like it might be a diode. Does it have a arrow on it. Pointing one way. If so it is stopping back feed. And yes it has to have both ends connected. |
|
| Author: | banded-mallard [ Wed May 03, 2017 4:24 am ] |
| Post subject: | Re: prodrive momentary switch question |
what year is it? |
|
| Author: | banded-mallard [ Wed May 03, 2017 4:29 am ] |
| Post subject: | Re: prodrive momentary switch question |
Mine is a 2007. Went bad and wouldn't allow the clutch to engage. Called PD and cut the diode out. Mine was in shrink wrap. Since cutting it out approx. 5 years ago, no issues. control box 1.jpg control box 2.jpg control box 3.jpg |
|
| Author: | sledhead26 [ Wed May 03, 2017 4:50 am ] |
| Post subject: | Re: prodrive momentary switch question |
Thanks Banded. Thats exactly what mine has. It was also in shrink wrap. Mine is a 2010 model. Ill cut it out and get rid of it. Thanks again |
|
| Author: | Tommyh172 [ Sun Mar 11, 2018 2:00 pm ] |
| Post subject: | Re: prodrive momentary switch question |
My Pto stoped at dock, will not engage but momentry works fine ! This is center console , any help ? Tommy h |
|
| Author: | brycecheramie [ Sun Mar 11, 2018 2:20 pm ] |
| Post subject: | Re: prodrive momentary switch question |
| Author: | BlueShamu [ Sun Mar 11, 2018 10:21 pm ] |
| Post subject: | prodrive momentary switch question |
Wire came undone beneath the console. Or, you need a new PTO switch. |
|
| Author: | banded-mallard [ Mon Mar 12, 2018 4:43 am ] |
| Post subject: | Re: prodrive momentary switch question |
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|