| MudmotorTalk.com http://mudmotortalk.com/mmt_v2/ |
|
| Prodrive missing bolt 5/16 x 1.5" http://mudmotortalk.com/mmt_v2/viewtopic.php?f=3&t=70716 |
Page 1 of 1 |
| Author: | woodie_slayer [ Sat Jul 01, 2017 4:48 pm ] |
| Post subject: | Prodrive missing bolt 5/16 x 1.5" |
I found a 5/16 x 1.5" bolt rattled loose on a g4 prodrive with hydro reverse near the clutch housing and i cant figure where it came from? Does anyone have a foggy idea? |
|
| Author: | wade_660 [ Sat Jul 01, 2017 5:31 pm ] |
| Post subject: | Re: Prodrive missing bolt 5/16 x 1.5" |
Post a pic of it Sent from my iPhone using Tapatalk |
|
| Author: | JJDTodd [ Mon Jul 03, 2017 5:13 pm ] |
| Post subject: | Re: Prodrive missing bolt 5/16 x 1.5" |
Didn't come out the bottom of the clutch assembly did It? There is 4 (don't remember size) on the bottom of the clutch. Sent from my SM-G928V using Tapatalk |
|
| Author: | BlueShamu [ Mon Jul 03, 2017 5:25 pm ] |
| Post subject: | Re: Prodrive missing bolt 5/16 x 1.5" |
Hex head or Allen head? Sent from my iPhone using Tapatalk |
|
| Author: | banded-mallard [ Mon Jul 03, 2017 6:36 pm ] |
| Post subject: | Re: Prodrive missing bolt 5/16 x 1.5" |
There is no way that 1 of the 4 clutch bolts can fall out with hydro reverse. The female adapter that bolts to the clutch is inside the round hydro gear. Impossible to fall out. |
|
| Author: | Will C [ Mon Jul 03, 2017 8:52 pm ] |
| Post subject: | Re: Prodrive missing bolt 5/16 x 1.5" |
Engine mounting bolt or a stray bolt someone used to lock the shaft from spinning while changing props, or ... |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|