| MudmotorTalk.com http://mudmotortalk.com/mmt_v2/ |
|
| Prodrive relay issue http://mudmotortalk.com/mmt_v2/viewtopic.php?f=3&t=71108 |
Page 1 of 1 |
| Author: | GDSArgo [ Thu Aug 24, 2017 4:04 pm ] |
| Post subject: | Prodrive relay issue |
Pressure washed the boat off and after it dried was spraying the motor and wires down with some WD40. When all hell broke loose red wire going to starter was a glowing and smoking the other wires got hot also. As fast as it happened it stopped key was off. Any suggestions on what to do other than rewire it and see what happens. Sent from my iPad using Tapatalk |
|
| Author: | GDSArgo [ Sun Sep 03, 2017 5:37 pm ] |
| Post subject: | Prodrive relay issue |
Got everything rewired and put in a new relay. Now all I get is a click as I hit the switches. Is it possibly the pump motor has gone bad? How can I check you see if that is the issue? Sent from my iPad using Tapatalk |
|
| Author: | Will C [ Sun Sep 03, 2017 7:38 pm ] |
| Post subject: | Re: Prodrive relay issue |
You need to verify good power and ground to the motor. If good then give motor a love tap to see if it wakes up |
|
| Author: | GDSArgo [ Mon Sep 04, 2017 10:52 am ] |
| Post subject: | Re: Prodrive relay issue |
Good power and multiple love taps. Is there a more economical replacement than direct from prodrive. Sent from my iPad using Tapatalk |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|