It is currently Thu Mar 28, 2024 12:00 pm




Reply to topic  [ 10 posts ] 
 GT 37 EFI Issue 
Author Message
MMT Member

Joined: Tue Mar 20, 2018 9:41 am
Posts: 5
Location: Homosassa, FL
Post GT 37 EFI Issue
I purchased a 2016 GT 37EFI in 2016 (new). The motor currently has roughly 220 hours on it and has been meticulously maintained (oil changes and general maintenance). The motor is losing power under a load and bogging down (wont get on a plane and pushing a little higher rpms than usual). When the engine is not under a load it seems to run just fine. The wiring harness was replaced and that seemed to fix the problem temporarily, however now the engine seems to be doing the same thing. The GT certified mechanic cant find what is causing the problem. Has anyone had a similar issue? If so what was the diagnosis? I really appreciate the feedback.Thanks


Tue Mar 20, 2018 9:56 am
Profile WWW
MMT F.E.

Joined: Mon Jul 14, 2014 8:19 am
Posts: 981
Post Re: GT 37 EFI Issue
Leakdown test?


Sent from my iPhone using Tapatalk Pro


Tue Mar 20, 2018 3:33 pm
Profile
MMT Member

Joined: Tue Mar 20, 2018 9:41 am
Posts: 5
Location: Homosassa, FL
Post Re: GT 37 EFI Issue
Im not exactly sure what test they did, according to the mechanic they have "tried everything"..... I will ask if they specifically did a leak down test. Thanks for the advise


Tue Mar 20, 2018 3:40 pm
Profile WWW
MMT Sponsor

Joined: Fri Jan 10, 2014 1:16 pm
Posts: 2107
Location: Gladewater TX
Post Re: GT 37 EFI Issue
Where are u from? There is only a handfull of guys around the country that Really know these motors


Tue Mar 20, 2018 4:24 pm
Profile
MMT Member

Joined: Tue Mar 20, 2018 9:41 am
Posts: 5
Location: Homosassa, FL
Post Re: GT 37 EFI Issue
I am in Florida. The boat is at Millers Marine in Ocala area.


Tue Mar 20, 2018 4:45 pm
Profile WWW
MMT F.E.

Joined: Mon Jul 14, 2014 8:19 am
Posts: 981
Post Re: GT 37 EFI Issue
Also how's the prop? Less hole shot and higher rpms could just be a worn prop. I'd check that and do a leakdown first to see if the valves leaking.


Sent from my iPhone using Tapatalk Pro


Tue Mar 20, 2018 4:55 pm
Profile
MMT Member

Joined: Tue Mar 20, 2018 9:41 am
Posts: 5
Location: Homosassa, FL
Post Re: GT 37 EFI Issue
prop is in excellent condition. You can actually feel and hear the motor failing to deliver power.


Tue Mar 20, 2018 5:09 pm
Profile WWW
MMT Elite Member
User avatar

Joined: Wed Jan 14, 2009 7:23 am
Posts: 6233
Location: Tarkington, TX
Post Re: GT 37 EFI Issue
You need a proper diagnosis man. Start with mechanics and simple things. No air leaks in fuel lines, valve lash, good plugs. From there verify your fuel pumps are indeed working. Then you can check for fuel pressure (need a special adapter) to verify 39 psi at the fuel rail. Most issues are harness related but they are not the issue all the time... Loaded you need to have everything working as that's when the most demand for air and fuel is needed.

_________________
Bayou Surface Drive
337-351-0362
Tarkington, TX 77327


Wed Mar 21, 2018 8:47 am
Profile
MMT Member

Joined: Tue Mar 20, 2018 9:41 am
Posts: 5
Location: Homosassa, FL
Post Re: GT 37 EFI Issue
Thanks for the help MaXX. I am at the mercy of the mechanic. I hope that those would be the first things they have checked. I will reiterate all of those things next time i speak with them.


Wed Mar 21, 2018 8:08 pm
Profile WWW
MMT Elite Member
User avatar

Joined: Wed Jan 14, 2009 7:23 am
Posts: 6233
Location: Tarkington, TX
Post Re: GT 37 EFI Issue
Sadly not many are capable of properly fixing the units. Any competent mechanic who buys the tools can repair it. Briggs has a good tech system to help with issues aswell...

_________________
Bayou Surface Drive
337-351-0362
Tarkington, TX 77327


Thu Mar 22, 2018 6:19 am
Profile
Display posts from previous:  Sort by  
Reply to topic   [ 10 posts ] 

Who is online

Users browsing this forum: No registered users and 263 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: