MudmotorTalk.com
http://mudmotortalk.com/mmt_v2/

Getting my rmps back on a 23
http://mudmotortalk.com/mmt_v2/viewtopic.php?f=3&t=73024
Page 1 of 1

Author:  RiverRunner21 [ Sat Sep 22, 2018 8:24 pm ]
Post subject:  Getting my rmps back on a 23

So I have a 23 briggs, was running 4500rmp out of water and 3970 in water. I got something in my main jet and had to pull the carb. Put it back on and was running 4200 out of water. So I adjusted the gov by holding wot, loosened lock nut, bottomed out gov shaft the way it would turn as the linkage moves and re-tightened. Now the things running 4100 out of water and 3910 in water. What am I doing wrong here? Any help is much appreciated.

Author:  Will C [ Sun Sep 23, 2018 1:52 am ]
Post subject:  Re: Getting my rmps back on a 23

Once you bottom it out you have to back it up just a touch so the carb can be at wot and gov not be bottomed out

Author:  RiverRunner21 [ Sun Sep 23, 2018 10:35 am ]
Post subject:  Re: Getting my rmps back on a 23

Thanks man, I gave that a try and it got locked at wot. I probably backed it off to much. I’ll give it another try, it was gettin late and I was frustrated haha

Page 1 of 1 All times are UTC - 6 hours
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/