MudmotorTalk.com http://mudmotortalk.com/mmt_v2/ |
|
Not getting spark http://mudmotortalk.com/mmt_v2/viewtopic.php?f=3&t=73072 |
Page 1 of 1 |
Author: | NEB [ Thu Oct 04, 2018 7:57 am ] |
Post subject: | Not getting spark |
I'm new to the whole mud motor scene, and got a beavertail with a (Vanguard) Briggs & Stratton Model 185487. Problem is i can't get the dang thing to start. I know i'm getting fuel and air, but i know i'm not getting spark. Put a new killswitch on it thinking it was that, no such luck. Put in a new plug, still no go. Could the coil be bad? I'm lost. Any help would be appreciated |
Author: | DmaxHunter [ Sat Oct 06, 2018 10:17 pm ] |
Post subject: | Re: Not getting spark |
Most longtails have a mercury switch, this only allows the motor to be started at a certain angle. Which is handle down with the prop it off water, goes its for safety reasons. They are usually cylindrical diameter is around a AA or AAA battery but I bit shorter. Have you looked into this. Sent from my SM-N950U using Tapatalk |
Page 1 of 1 | All times are UTC - 6 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |