MudmotorTalk.com
http://mudmotortalk.com/mmt_v2/

New 23 Vanguard electric start not working
http://mudmotortalk.com/mmt_v2/viewtopic.php?f=3&t=73134
Page 1 of 1

Author:  Eaglecliff [ Fri Oct 19, 2018 6:37 pm ]
Post subject:  New 23 Vanguard electric start not working

Brand new motor I got a week ago on my backwater, When i first got it the electric start worked for 3-4 times, now it doesnt do anything, pull start still works. Battery is charged and everything else obvious is in order. I did notice that the white wire coming out of the ignition isnt connected to anything unlike the other 4 or 5 wires. I dont see anything that the wire wire could connect to. Am i missing something?

Author:  W_HILL [ Fri Oct 19, 2018 6:57 pm ]
Post subject:  Re: New 23 Vanguard electric start not working

I don't believe that white wire is supposed to connect to anything. The plug on the back of your ignition switch may have come loose

Sent from my LG-TP260 using Tapatalk

Author:  Russ [ Fri Oct 19, 2018 8:15 pm ]
Post subject:  Re: New 23 Vanguard electric start not working

Post pics of what you're describing, then go dig through the service manual while you await a response from someone that knows these particular engines.

#CFFITR
#TheGhostBoat
#whoneedsphysicsihaveamudmotor

Author:  Bigen [ Sat Oct 20, 2018 9:18 am ]
Post subject:  Re: New 23 Vanguard electric start not working

I think everyone needs a powerprobe. Is the white wire positive or ground or open?

Author:  Eaglecliff [ Sat Oct 20, 2018 5:00 pm ]
Post subject:  Re: New 23 Vanguard electric start not working

heres a picture...

Author:  Russ [ Sat Oct 20, 2018 5:20 pm ]
Post subject:  Re: New 23 Vanguard electric start not working

Between the two posts on the starter solenoid, is there a connection for that white wire? The solenoid needs a signal that you turned the key to engage. I'm guessing it's that white wire.

#CFFITR
#TheGhostBoat
#whoneedsphysicsihaveamudmotor

Author:  Eaglecliff [ Mon Oct 29, 2018 6:11 pm ]
Post subject:  Re: New 23 Vanguard electric start not working

turns out it was the tilt switch, the motor has to be so high for the electric start to work..

Page 1 of 1 All times are UTC - 6 hours
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/